|This article needs additional citations for "verification. (August 2013) ("Learn how and when to remove this template message)|
Anti-magnetic (non-magnetic) watches are those that are able to run with minimal deviation when exposed to a certain level of "magnetic field. The "International Organization for Standardization issued a standard for magnetic-resistant watches, which many countries have adopted.
The international standard ISO 764 Horology—Magnetic resistant watches defines the resistance of watches to magnetic fields. According to ISO 764 or its equivalent "DIN 8309 (Deutsches Institut für Normung - German Institute for Standardization) a "watch must resist exposition to a direct current "magnetic field of 4 800 "A/"m. The watch must keep its accuracy to ±30 seconds/day as measured before the test in order to be acknowledged as a magnetic-resistant watch. Annex A of ISO 764 deals with watches designated as magnetic resistant with an additional indication of intensity of a magnetic field exceeding 4 800 A/m.
There are two ways of building an anti-magnetic watch:
The first recorded experiments in anti-magnetic watch-making are in 1846. Watchmakers from "Vacheron Constantin were among the first to experiment with anti-magnetic features of a watch. However, they succeeded in assembling the first antimagnetic watch only several decades later. That watch was able to withstand magnetic fields because some of its parts were made of non-magnetic "metals: the "palladium-made "balance wheel, "balance spring and the lever shaft.
In 1896 "Charles Édouard Guillaume discovered the nickel based alloy Invar. Afterwards, in 1920, when he received the "Nobel Prize in "Physics, he developed another alloy - Elinvar. These alloys assisted in the assembly of anti-magnetic watches. Invar and Elinvar are able to resist magnetic fields, allowing the watch to continue to keep accurate time.
Since their appearance, anti-magnetic watches have been favored by people who deal with high magnetic fields. They are widespread among electronic engineers and in other professions where strong magnetic fields are present.
After discovering the alloys for assembling anti-magnetic watches, many watch-making brands utilize such materials in production in order to improve the performance of such timepieces.
In 1989 IWC first manufactured the Ingenieur Reference 3508 , which was able to withstand huge magnetic fields of up to 500,000 A/m.
The Omega Anti-Magnetic Seamaster was announced 17 January 2013. According to the press release, the OMEGA movement does not rely on a protective container inside the watchcase but on the use of selected non-ferrous materials in the movement itself. The OMEGA prototype was subjected to 1.5 Tesla (15,000 gauss) and continued to perform. Testing showed that the watch was as accurate after its magnetic exposure as it had been before. A live demonstration was then made that offered compelling and conclusive evidence that OMEGA’s new >15,000 gauss movement is a landmark development in watchmaking. OMEGA expects to present the technology at the Baselworld trade fair in April. The new movement, the OMEGA Co-Axial calibre 8508, should be introduced to the market in 2013.
The "Rolex Milgauss series of antimagnetic certified chronometers was first manufactured in 1954 with the model 6541 for those working in nuclear, aircraft, and medical settings associated with strong magnetic fields. The watch has an advertised magnetic flux density resistance of 1 000 gauss within magnetic fields of 80 000 A/m. In 2007, after being out of production for nearly two decades a new Milgauss was introduced as the model number 116400.