Bone china is a type of "soft-paste porcelain that is composed of "bone ash, "feldspathic material, and "kaolin. It has been defined as ware with a translucent body containing a minimum of 30% of phosphate derived from animal bone and calculated calcium phosphate. Bone china is the strongest of the porcelain or china ceramics, having very high mechanical strength and chip resistance, and is known for its high levels of whiteness and translucency. Its high strength allows it to be produced in thinner cross-sections than other types of porcelain. Like "stoneware it is "vitrified, but is translucent due to differing mineral properties.
The first commercially widespread bone china was developed by the English potter "Josiah Spode in the early 1790s. From its initial development and up to the latter part of the 20th century, bone china was almost exclusively an English product, with production being effectively localised in "Stoke-on-Trent. Most major English firms made or still make it, including "Fortnum & Mason, "Mintons, "Coalport, "Spode, "Royal Crown Derby, "Royal Doulton, "Wedgwood and "Worcester.
In the UK, references to "china" or "porcelain" can refer to bone china, and "English porcelain" has been used as a term for it, both in the UK and around the world.
The first development of what would become known as bone china was made by "Thomas Frye at his "Bow porcelain factory near "Bow in "East London in 1748. His factory was located very close to the cattle markets and slaughterhouses of Essex, and hence easy access to animal bones. Frye used up to 45% bone ash in his formulation to create what he called "fine porcelain". Although in quality it rivalled porcelain imported from Europe and China the factory was not a commercial success.
Later, "Josiah Spode in "Stoke-on-Trent further developed the concept between 1789 and 1793, introducing his "Stoke China" in 1796, the year before his sudden death; his son "Josiah II quickly rechristened the ware "Bone china". Among his developments was to abandon Frye's procedure of "calcining the bone together with some of the other body raw materials, instead calcining just the bone. Bone china quickly proved to be highly popular, leading to its production by other English pottery manufacturers. Both Spode's formulation and his business were successful: his formulation of 6 parts bone ash, 4 parts "china stone and 3.5 parts "china clay, remains the basis for all bone china, and it was only in 2009 that his company, "Spode, went into "receivership before eventually being purchased by "Portmeirion.
The production of bone china is similar to porcelain, except that more care is needed because of its lower "plasticity and a narrower "vitrification range. The traditional formulation for bone china is about 25% "kaolin, 25% "Cornish stone and 50% "bone ash. The bone ash that is used in bone china is made from cattle bones that have a lower iron content. These bones are crushed before being degelatinised and then "calcined at up to 1250 °C to produce "bone ash. The ash is milled to a fine particle size. The kaolin component of the body is needed to give the unfired body plasticity which allows articles to be shaped. This mixture is then fired at around 1200 °C. The raw materials for bone china are comparatively expensive, and the production is labour-intensive, which is why bone china maintains a luxury status and high pricing.
For almost 200 years from its development bone china was almost exclusively produced in the UK. During the middle part of the 20th century manufacturers in other countries began production, with the first successful ones outside the UK being in Japan: "Noritake, Nikko and Narumi. 
In more recent years production in "China has expanded considerably, and the country is now the biggest producer of bone china in the world. Other countries producing considerable amounts of bone china are "Bangladesh, "India, "Indonesia, "Iran["citation needed], "Sri Lanka and "Thailand.
From the start of the first factory, Bengal Potteries, in 1964, bone china output from Indian factories had risen to 10,000 tonnes per year by 2009.  "Rajasthan has become a hub for bone china in India, with production in the state totaling 16-17 tonnes per day.