Powered by
TTSReader
Share this page on
Article provided by Wikipedia


Density
Common symbols
"ρ
D
"SI unit kg/m3
""
""
A "graduated cylinder containing various coloured liquids with different densities.

The density, or more precisely, the volumetric mass density, of a substance is its "mass per unit "volume. The symbol most often used for density is ρ (the lower case Greek letter "rho), although the Latin letter D can also be used. Mathematically, density is defined as mass divided by volume:[1]

where ρ is the density, m is the mass, and V is the volume. In some cases (for instance, in the United States oil and gas industry), density is loosely defined as its "weight per unit "volume,[2] although this is scientifically inaccurate – this quantity is more specifically called "specific weight.

For a pure substance the density has the same numerical value as its "mass concentration. Different materials usually have different densities, and density may be relevant to "buoyancy, purity and "packaging. "Osmium and "iridium are the densest known elements at "standard conditions for temperature and pressure but certain chemical compounds may be denser.

To simplify comparisons of density across different systems of units, it is sometimes replaced by the "dimensionless quantity ""relative density" or ""specific gravity", i.e. the ratio of the density of the material to that of a standard material, usually water. Thus a relative density less than one means that the substance floats in water.

The density of a material varies with temperature and pressure. This variation is typically small for solids and liquids but much greater for gases. Increasing the pressure on an object decreases the volume of the object and thus increases its density. Increasing the temperature of a substance (with a few exceptions) decreases its density by increasing its volume. In most materials, heating the bottom of a fluid results in "convection of the heat from the bottom to the top, due to the decrease in the density of the heated fluid. This causes it to rise relative to more dense unheated material.

The reciprocal of the density of a substance is occasionally called its "specific volume, a term sometimes used in "thermodynamics. Density is an "intensive property in that increasing the amount of a substance does not increase its density; rather it increases its mass.

Contents

History[edit]

In a well-known but probably apocryphal tale, "Archimedes was given the task of determining whether "King Hiero's "goldsmith was embezzling "gold during the manufacture of a golden "wreath dedicated to the gods and replacing it with another, cheaper "alloy.[3] Archimedes knew that the irregularly shaped wreath could be crushed into a cube whose volume could be calculated easily and compared with the mass; but the king did not approve of this. Baffled, Archimedes is said to have taken an immersion bath and observed from the rise of the water upon entering that he could calculate the volume of the gold wreath through the "displacement of the water. Upon this discovery, he leapt from his bath and ran naked through the streets shouting, "Eureka! Eureka!" (Εύρηκα! Greek "I have found it"). As a result, the term ""eureka" entered common parlance and is used today to indicate a moment of enlightenment.

The story first appeared in written form in "Vitruvius' "books of architecture, two centuries after it supposedly took place.[4] Some scholars have doubted the accuracy of this tale, saying among other things that the method would have required precise measurements that would have been difficult to make at the time.[5][6]

From the equation for density (ρ = m/V), mass density has units of mass divided by volume. As there are many units of mass and volume covering many different magnitudes there are a large number of units for mass density in use. The "SI unit of "kilogram per "cubic metre (kg/m3) and the "cgs unit of "gram per "cubic centimetre (g/cm3) are probably the most commonly used units for density. One g/cm3 is equal to one thousand kg/m3. One cubic centimetre (abbreviation cc) is equal to one millilitre. In industry, other larger or smaller units of mass and or volume are often more practical and "US customary units may be used. See below for a list of some of the most common units of density.

Measurement of density[edit]

Homogeneous materials[edit]

The density at all points of a "homogeneous object equals its total "mass divided by its total volume. The mass is normally measured with a "scale or balance; the volume may be measured directly (from the geometry of the object) or by the displacement of a fluid. To determine the density of a liquid or a gas, a "hydrometer, a "dasymeter or a "Coriolis flow meter may be used, respectively. Similarly, "hydrostatic weighing uses the displacement of water due to a submerged object to determine the density of the object.

Heterogeneous materials[edit]

If the body is not homogeneous, then its density varies between different regions of the object. In that case the density around any given location is determined by calculating the density of a small volume around that location. In the limit of an infinitesimal volume the density of an inhomogeneous object at a point becomes: , where is an elementary volume at position . The mass of the body then can be expressed as

Non-compact materials[edit]

In practice, bulk materials such as sugar, sand, or snow contain voids. Many materials exist in nature as flakes, pellets, or granules.

Voids are regions which contain something other than the considered material. Commonly the void is air, but it could also be vacuum, liquid, solid, or a different gas or gaseous mixture.

The bulk volume of a material—inclusive of the void fraction—is often obtained by a simple measurement (e.g. with a calibrated measuring cup) or geometrically from known dimensions.

Mass divided by bulk volume determines "bulk density. This is not the same thing as volumetric mass density.

To determine volumetric mass density, one must first discount the volume of the void fraction. Sometimes this can be determined by geometrical reasoning. For the "close-packing of equal spheres the non-void fraction can be at most about 74%. It can also be determined empirically. Some bulk materials, however, such as sand, have a variable void fraction which depends on how the material is agitated or poured. It might be loose or compact, with more or less air space depending on handling.

In practice, the void fraction is not necessarily air, or even gaseous. In the case of sand, it could be water, which can be advantageous for measurement as the void fraction for sand saturated in water—once any air bubbles are thoroughly driven out—is potentially more consistent than dry sand measured with an air void.

In the case of non-compact materials, one must also take care in determining the mass of the material sample. If the material is under pressure (commonly ambient air pressure at the earth's surface) the determination of mass from a measured sample weight might need to account for buoyancy effects due to the density of the void constituent, depending on how the measurement was conducted. In the case of dry sand, sand is so much denser than air that the buoyancy effect is commonly neglected (less than one part in one thousand).

Mass change upon displacing one void material with another while maintaining constant volume can be used to estimate the void fraction, if the difference in density of the two voids materials is reliably known.

Changes of density[edit]

In general, density can be changed by changing either the "pressure or the "temperature. Increasing the pressure always increases the density of a material. Increasing the temperature generally decreases the density, but there are notable exceptions to this generalization. For example, the density of "water increases between its melting point at 0 °C and 4 °C; similar behavior is observed in "silicon at low temperatures.

The effect of pressure and temperature on the densities of liquids and solids is small. The "compressibility for a typical liquid or solid is 10−6 "bar−1 (1 bar = 0.1 MPa) and a typical "thermal expansivity is 10−5 "K−1. This roughly translates into needing around ten thousand times atmospheric pressure to reduce the volume of a substance by one percent. (Although the pressures needed may be around a thousand times smaller for sandy soil and some clays.) A one percent expansion of volume typically requires a temperature increase on the order of thousands of degrees "Celsius.

In contrast, the density of gases is strongly affected by pressure. The density of an "ideal gas is

where M is the "molar mass, P is the pressure, R is the "universal gas constant, and T is the "absolute temperature. This means that the density of an ideal gas can be doubled by doubling the pressure, or by halving the absolute temperature.

In the case of volumic thermal expansion at constant pressure and small intervals of temperature the temperature dependence of density is :

where is the density at a reference temperature, is the thermal expansion coefficient of the material at temperatures close to .

Density of solutions[edit]

The density of a "solution is the sum of "mass (massic) concentrations of the components of that solution.

Mass (massic) concentration of each given component ρi in a solution sums to density of the solution.

Expressed as a function of the densities of pure components of the mixture and their "volume participation, it allows the determination of "excess molar volumes:

provided that there is no interaction between the components.

Knowing the relation between excess volumes and activity coefficients of the components, one can determine the activity coefficients.

Densities[edit]

Various materials[edit]

Densities of various materials covering a range of values
Material ρ (kg/m3)[note 1] Notes
"Hydrogen 0.0898
"Helium 0.179
"Aerographite 0.2 [note 2][7][8]
"Metallic microlattice 0.9 [note 2]
"Aerogel 1.0 [note 2]
"Air 1.2 At sea level
"Tungsten hexafluoride 12.4 One of the heaviest known gases at standard conditions
"Liquid hydrogen 70 At approx. −255 °C
"Styrofoam 75 Approx.[9]
"Cork 240 Approx.[9]
"Pine 373 [10]
"Lithium 535
"Wood 700 Seasoned, typical[11][12]
"Oak 710 [10]
"Potassium 860 [13]
"Ice 916.7 At temperature < 0 °C
"Cooking oil 910...930
"Sodium 970
"Water (fresh) 1,000 At 4 °C, the temperature of its maximum density
"Water (salt) 1,030 0.9%
"Liquid oxygen 1,141 At approx. −219 °C
"Nylon 1,150
"Plastics 1,175 Approx.; for "polypropylene and "PETE/"PVC
"Tetrachloroethene 1,622
"Magnesium 1,740
"Beryllium 1,850
"Glycerol 1,261 [14]
"Concrete 2,400 [15][16]
"Silicon 2,330
"Aluminium 2,700
"Diiodomethane 3,325 Liquid at room temperature
"Diamond 3,500
"Titanium 4,540
"Selenium 4,800
"Vanadium 6,100
"Antimony 6,690
"Zinc 7,000
"Chromium 7,200
"Tin 7,310
"Manganese 7,325 Approx.
"Iron 7,870
"Niobium 8,570
"Brass 8,600 [16]
"Cadmium 8,650
"Cobalt 8,900
"Nickel 8,900
"Copper 8,940
"Bismuth 9,750
"Molybdenum 10,220
"Silver 10,500
"Lead 11,340
"Thorium 11,700
"Rhodium 12,410
"Mercury 13,546
"Tantalum 16,600
"Uranium 18,800
"Tungsten 19,300
"Gold 19,320
"Plutonium 19,840
"Rhenium 21,020
"Platinum 21,450
"Iridium 22,420
"Osmium 22,570
Notes:
  1. ^ Unless otherwise noted, all densities given are at "standard conditions for temperature and pressure,
    that is, 273.15 "K (0.00 °C) and 100 kPa (0.987 atm).
  2. ^ a b c Air contained in material excluded when calculating density

Others[edit]

Entity ρ (kg/m3) Notes
"Interstellar medium 1×10−19 Assuming 90% H, 10% He; variable T
The "Earth 5,515 Mean density.[17]
The "inner core of the Earth 13,000 Approx., as listed in "Earth.[18]
The core of the "Sun 33,000–160,000 Approx.[19]
"Super-massive black hole 9×105 Density of a 4.5-million-solar-mass black hole
"Event horizon radius is 13.5 million km.
"White dwarf star 2.1×109 Approx.[20]
"Atomic nuclei 2.3×1017 Does not depend strongly on size of nucleus[21]
"Neutron star 1×1018
Stellar-mass "black hole 1×1018 Density of a 4-solar-mass black hole
"Event horizon radius is 12 km.

Water[edit]

Density of liquid water at 1 "atm pressure
Temp. (°C)[note 1] Density (kg/m3)
−30 983.854
−20 993.547
−10 998.117
0 999.8395
4 999.9720
10 999.7026
15 999.1026
20 998.2071
22 997.7735
25 997.0479
30 995.6502
40 992.2
60 983.2
80 971.8
100 958.4
Notes:
  1. ^ Values below 0 °C refer to "supercooled water.

Air[edit]

""
""
Air density vs. temperature
Density of air at 1 "atm pressure
T (°C) ρ (kg/m3)
−25 1.423
−20 1.395
−15 1.368
−10 1.342
−5 1.316
0 1.293
5 1.269
10 1.247
15 1.225
20 1.204
25 1.184
30 1.164
35 1.146

Molar volumes of liquid and solid phase of elements[edit]

""
""
Molar volumes of liquid and solid phase of elements

Common units[edit]

The "SI unit for density is:

The litre and metric tons are not part of the SI, but are acceptable for use with it, leading to the following units:

Densities using the following metric units all have exactly the same numerical value, one thousandth of the value in (kg/m3). Liquid "water has a density of about 1 kg/dm3, making any of these SI units numerically convenient to use as most "solids and "liquids have densities between 0.1 and 20 kg/dm3.

In "US customary units density can be stated in:

"Imperial units differing from the above (as the Imperial gallon and bushel differ from the US units) in practice are rarely used, though found in older documents. The Imperial gallon was based on the concept that an "Imperial fluid ounce of water would have a mass of one Avoirdupois ounce, and indeed 1 g/cc ≈ 1.00224129 ounces per Imperial fluid ounce = 10.0224129 pounds per Imperial gallon. The density of "precious metals could conceivably be based on "Troy ounces and pounds, a possible cause of confusion.

See also[edit]

References[edit]

  1. ^ "The National Aeronautic and Atmospheric Administration's "Glenn Research Center. "Gas Density Glenn research Center". grc.nasa.gov. Archived from the original on April 14, 2013. 
  2. ^ "Density definition in Oil Gas Glossary". Oilgasglossary.com. Archived from the original on August 5, 2010. Retrieved September 14, 2010. 
  3. ^ Archimedes, A Gold Thief and Buoyancy Archived August 27, 2007, at the "Wayback Machine. – by Larry "Harris" Taylor, Ph.D.
  4. ^ Vitruvius on Architecture, Book IX, paragraphs 9–12, translated into English and in the original Latin.
  5. ^ "EXHIBIT: The First Eureka Moment". Science. 305 (5688): 1219e. 2004. "doi:10.1126/science.305.5688.1219e. 
  6. ^ Fact or Fiction?: Archimedes Coined the Term "Eureka!" in the Bath, Scientific American, December 2006.
  7. ^ New carbon nanotube struructure aerographite is lightest material champ Archived October 17, 2013, at the "Wayback Machine.. Phys.org (July 13, 2012). Retrieved on July 14, 2012.
  8. ^ Aerographit: Leichtestes Material der Welt entwickelt – SPIEGEL ONLINE Archived October 17, 2013, at the "Wayback Machine.. Spiegel.de (July 11, 2012). Retrieved on July 14, 2012.
  9. ^ a b "Re: which is more bouyant [sic] styrofoam or cork". Madsci.org. Archived from the original on February 14, 2011. Retrieved September 14, 2010. 
  10. ^ a b Raymond Serway; John Jewett (2005), Principles of Physics: A Calculus-Based Text, Cengage Learning, p. 467, "ISBN "0-534-49143-X, archived from the original on May 17, 2016 
  11. ^ "Wood Densities". www.engineeringtoolbox.com. Archived from the original on October 20, 2012. Retrieved October 15, 2012. 
  12. ^ "Density of Wood". www.simetric.co.uk. Archived from the original on October 26, 2012. Retrieved October 15, 2012. 
  13. ^ CRC Press Handbook of tables for Applied Engineering Science, 2nd Edition, 1976, Table 1-59
  14. ^ glycerol composition at Archived February 28, 2013, at the "Wayback Machine.. Physics.nist.gov. Retrieved on July 14, 2012.
  15. ^ [1]
  16. ^ a b Hugh D. Young; Roger A. Freedman. University Physics with Modern Physics Archived April 30, 2016, at the "Wayback Machine.. Addison-Wesley; 2012. "ISBN "978-0-321-69686-1. p. 374.
  17. ^ Density of the Earth, wolframalpha.com, archived from the original on October 17, 2013 
  18. ^ Density of Earth's core, wolframalpha.com, archived from the original on October 17, 2013 
  19. ^ Density of the Sun's core, wolframalpha.com, archived from the original on October 17, 2013 
  20. ^ Extreme Stars: White Dwarfs & Neutron Stars Archived September 25, 2007, at the "Wayback Machine., Jennifer Johnson, lecture notes, Astronomy 162, "Ohio State University. Accessed: May 3, 2007.
  21. ^ Nuclear Size and Density Archived July 6, 2009, at the "Wayback Machine., HyperPhysics, Georgia State University. Accessed: June 26, 2009.

External links[edit]

) ) WikipediaAudio is not affiliated with Wikipedia or the WikiMedia Foundation.