This article needs additional citations for "verification. (October 2007) ("Learn how and when to remove this template message)
The most common methods in Western typography fall under the general technique of emphasis through a change or modification of font: italics, boldface and "small caps. Other methods include the alteration of LETTER CASE and spacing as well as color and *additional graphic marks*.
The human eye is very receptive to differences in "brightness within a text body". Therefore, one can differentiate between types of emphasis according to whether the emphasis changes the “"blackness” of text, sometimes referred to as typographic color. A means of emphasis that does not have much effect on blackness is the use of "italics, where text is written in a script style, or "oblique, where the vertical orientation of each letter of the text is slanted to the left or right. With one or the other of these techniques (usually only one is available for any typeface), words can be highlighted without making them stand out much from the rest of the text (inconspicuous stressing). This is used for marking passages that have a different context, such as book titles, words from foreign languages, and the like.
By contrast, a bold "font weight makes letters of a text thicker than the surrounding text. Bold strongly stands out from regular text, and is often used to highlight keywords important to the text's content and allowing such words to be visually scanned with ease. For example, printed dictionaries often use boldface for their keywords, and the names of entries can conventionally be marked in bold. If a publisher prefers not to use bold, or has already used it for another purpose, a second form of emphasis can be introduced by using a lightface or thin version of the main text font, although this is not very common.
If the text body is typeset in a "serif typeface, it is also possible to highlight words by setting them in a "sans serif face. This practice is often considered archaic in Latin script, and on computers is complicated since fonts are no longer issued by foundries with a standard baseline, so switching font may distort linespacing. It is still possible using some "font superfamilies, which come with matching serif and sans-serif variants, though these are not generally supplied with modern computers as system fonts. In Japanese typography, due to the reduced legibility of heavier "Minchō type, the practice remains common.
Of these methods, italics, small capitals and "capitalisation are oldest, with bold type and sans-serif typefaces not arriving until the nineteenth century.
Capitalization is used much less frequently by British publishers, and usually only for book titles.
Socially, the use of all-caps text in Roman languages has become an indicator of shouting when quoting speech. It was also often used in the past by American lawyers to flag important points in a legal text. Coinciding with the era of typewriter use, the practice became unnecessary with the advent of computerised text formatting, although it is still found on occasion in documents created by older lawyers.
This section's factual accuracy is "disputed. (April 2011) ("Learn how and when to remove this template message)
Another means of emphasis is to increase the spacing between the letters, rather than making them darker, but still achieving a distinction in blackness. This results in an effect reverse to boldface: the emphasized text becomes lighter than its environment. This is often used in "blackletter typesetting and "typewriter manuscripts, but by no means restricted to those situations.
This "letter-spacing is referred to as sperren in German which could be translated as "spacing out": in typesetting with letters of lead, the spacing would be achieved by inserting additional non-printing slices of metal between the types, usually about an eighth of an em wide. On typewriters a full space was used between the letters of an emphasised word and also one before and one after the word.
For black letter type boldface was not feasible, since the letters were very dark in their standard format, and on (most) typewriters only a single type was available. Although letterspacing was common, sometimes different typefaces (e.g. "Schwabacher inside "Fraktur), underlining or colored, usually red ink were used instead.
Since blackletter type remained in use in German speaking parts of Europe "much longer than anywhere else, the custom of letterspacing is sometimes seen as specific to German, although it has been used with other languages, including English. Especially in German, however, this kind of emphasis may also be used within modern type, e.g. where italics already serve another semantic purpose (as in linguistics) and where no further means of emphasis (e.g. small caps) are easily available or feasible. Its professional use today is very limited in German. This use of spacing is also traditionally found in Polish.
German orthographic (or rather typographic) rules require that the mandatory blackletter "ligatures are retained. That means, ſt, ch, ck, and tz are still stuck together just as the letter "ß, whereas optional, additional ligatures like ff and ſi are broken up with a (small) space in between. Other writing systems did not develop such sophisticated rules since spacing was so uncommon therein.
In "Cyrillic typography, it also used to be common to emphasize words using letterspaced type. This practice for Cyrillic has become obsolete with the availability of Cyrillic italic and small capital fonts.
Professional Western typesetting usually does not employ lines under letters for emphasis within running text, because it is considered too distracting. Underlining is, however, often used with typewriters, in handwriting and with some non-alphabetic scripts. It is also used for secondary emphasis, i.e. marks added by the reader and not the author.
In Arabic, it is traditional to emphasize text by drawing a line over the letters.
In "Chinese, emphasis in body text is supposed to be indicated by using an "emphasis mark" (着重號／着重号), which is a dot placed under each character to be emphasized. This is still taught in schools but in practice it is not usually done, probably due to the difficulty of doing this using most computer software. Consequently, methods used for emphasis in Western text are often used instead, even though they are considered inappropriate for Chinese (for example, the use of underlining or setting text in "oblique type).
In "Japanese texts, when katakana would be inappropriate, emphasis is indicated by "emphasis dots" (圏点 or 傍点) placed above the "kanji and any accompanying "furigana in "horizontal writing and to the right in "vertical writing. Japanese also has an "emphasis line" (傍線) used in a similar manner, but less frequently.
In "Internet usage, "asterisks are sometimes used for emphasis (as in "That was *really* bad"). Less commonly, "underscores may be used, resembling underlining ("That was _really_ bad"). These are seen on sites where input is restricted to plain text with no method to apply markup tags (e.g. <i> for italics, or <b> for boldface). In some cases, the engine behind the text area being parsed will render the text and the asterisks in bold automatically after the text is submitted.
Colors are important for emphasizing. Important words in a text may be colored differently from others. For example, many dictionaries use a different color for "headwords, and some religious texts color the words of deities red, commonly referred to as "rubric. In "Ethiopic script, red is used analogously to italics in Latin text.
Post-print emphasis added by a reader is often done with "highlighters which add a bright background color to usual black text.
There are many designs. With both italics and boldface, the emphasis is correctly achieved by swapping into a different "font of the same family; for example by replacing body text in "Arial with its bold or italic style. Professional typographic systems, including most modern computers, would therefore not simply tilt letters to the right to achieve italics (that is instead referred to as "slanting or oblique), print them twice or darker for boldface, or scale majuscules to the height of middle-chamber minuscules (like x and o) for small-caps, but instead use entirely different typefaces that achieve the effect. The letter ‘w’, for example, looks quite different in italic compared to upright.
As a result, typefaces therefore have to be supplied at least fourfold (with computer systems, usually as four font files): as regular, bold, italic, and bold italic to provide for all combinations. Professional typefaces sometimes offer even more variations for popular fonts, with varying degrees of blackness. Only if such fonts are not available should["citation needed] the effect of italic or boldface be imitated by algorithmically altering the original font.
The modern Latin-alphabet system of fonts appearing in four standard weights, regular (or "Roman"), italic, bold and bold italic is a relatively recent development, dating to the early twentieth century. Modern "Roman" type was developed around the 1470s, while italic type was developed around 1500 and was commonly used for emphasis by the early 17th century. Bold type did not arrive until the nineteenth century, and at first fonts did not have matching bold weights; instead a generic bold, sometimes a "Clarendon or other kind of "slab-serif, would be swapped in. In some books printed before bold type existed, emphasis could be shown by switching to "blackletter. Some font families intended for professional use in documents such as business reports may also make the bold-style numbers take up the same width as the regular (non-bold) numbers, so a bold-style total lines up below the digits of the sum in regular style.
"Linguistics professor "Larry Trask stated that "It is possible to write an entire word or phrase in capital letters in order to emphasize it", but adds that "On the whole, though, it is preferable to express emphasis, not with capital letters, but with italics."
The other kind of secondary type, the related bold face, is a twentieth-century creation. Although the use of bold type for emphasis in text began when display advertising became a feature of the family magazines of the mid-nineteenth century, the bold types themselves were Clarendons, Ionics and Antiques quite unrelated to the old styles and moderns used for the text. As late as 1938 the "Monotype Recorder, a distinguished British journal of typography, could say, “The ‘related bold’ is a comparatively new phenomenon in the history of type cutting.”
For the record, the Clarendon type of the Besley foundry is indeed the first type actually designed as a ‘related bold’ – that is, made to harmonize in design and align with the roman types it was set with. It was registered in Britain in 1845...but the idea of a ‘bold face’ goes back much further. Before the launch of Clarendon type printers picked out words in slab-serifs or any other heavy type. In the 18th century they used ‘English’ or ‘Old English’ types, which is why they became known as ‘black letter’. John Smith says in his Printer’s grammar (London, 1755). ‘Black Letter … is sometimes used … to serve for matter which the Author would particularly enforce to the reader.’
|Look up boldface or Appendix:Boldface in Wiktionary, the free dictionary.|