This article needs additional citations for "verification. (January 2014) ("Learn how and when to remove this template message)
|"Private company (former "state company)|
|Industry||transport vehicle manufacturing
"iron and "steel manufacturing
|Founded||1845, "Budapest, "Habsburg Empire|
|Headquarters||"Budapest, "Habsburg Empire (1845-1867)
"Budapest, "Austria-Hungary (1867-1918)
"Budapest, "Hungary (1918-1949)
|Owner||"Ábrahám Ganz and his family (1845-1947)
"State of Hungary (1946-1949)
|"Subsidiaries||Ganz Danubius (ships)
Ganz Acélszerkezet (bridge steel structures)
Ganz Transelektro (high voltage equipment)
The Ganz Works or Ganz ("Hungarian: Ganz vállalatok or Ganz Művek, Ganz enterprises or Ganz companies) was a group of companies operating between 1845 and 1949 in "Budapest, "Hungary. It was named after "Ábrahám Ganz, the founder and the manager of the company. It is probably best known for the manufacture of "tramcars, but was also a pioneer in the application of "three-phase alternating current to electric railways. Ganz also made ships (Ganz Danubius), bridge steel structures (Ganz Acélszerkezet) and high voltage equipment (Ganz Transelektro). Since 1989, various parts of Ganz have been taken over by other companies.
The company was founded by Abraham Ganz in 1844. He established his own iron foundry in Buda in the "Kingdom of Hungary. Consequently, this factory played an important role in building the infrastructure of the Hungarian Kingdom and the "Austro-Hungarian Empire.["citation needed] At this time the agricultural machines, steam-locomotives, pumps and the railway carriages were the main products. At the beginning of the 20th century, 60 to 80% of the factory's products were sold for export.
At the end of the 19th century, the products of the Ganz and Partner Iron Mill and Machine Factory (hereinafter referred to as Ganz Works) promoted the expansion of alternating-current power transmissions.["citation needed]
In 1878, the company's general manager "András Mechwart founded the Department of Electrical Engineering headed by "Károly Zipernowsky. Engineers "Miksa Déri and "Ottó Bláthy also worked at the department producing "direct-current machines and "arc lamps.
The first turbo generators were "water turbines which drove "electric generators. The first Hungarian water turbine was designed by engineers of the Ganz Works in 1866. Mass production of dynamo generators started in 1883.
The missing link of a full Voltage Sensitive/Voltage Intensive (VSVI) system was the reliable "alternating current constant voltage generator. Therefore the invention of the constant voltage generator by the Ganz Works in 1883 had a crucial role in the beginnings of industrial scale AC power generation, because only these type of generators can produce a stable output voltage, regardless of the actual load.
In cooperation, Zipernovsky, Bláthy and Déri (known as the ZBD team) constructed and patented the "transformer. The "transformer" was named by Ottó Titusz Bláthy. The three invented the first high efficiency, closed core shunt connection transformer. They also invented the modern "power distribution system: Instead of a series of connections they connected supply transformers in parallel to the main line.
The transformer patents described two basic principles. Loads were to be connected in parallel, not in series as had been the general practice until 1885. Additionally, the inventors described the closed armature as an essential part of the transformer. Both factors assisted the stabilisation of voltage under varying load, and allowed definition of standard voltages for distribution and loads. The parallel connection and efficient closed core made construction of electrical distribution systems technically and economically feasible.
The Ganz Works built the first transformers using iron plating of enamelled mild iron wire, and started to use laminated core at the end of 1885.["citation needed]
In 1886, the ZBD engineers designed, and the company supplied, electrical equipment for the world's first "power station to use AC generators to power a parallel connected common electrical network. This was the Italian steam-powered Rome-Cerchi power plant.
Following the introduction of the transformer, the Ganz Works changed over to production of alternating-current equipment. For instance, Rome's electricity was supplied by hydroelectric plant and long-distance energy transfer.
The first mass-produced kilowatt-hour meter ("electricity meter), based on Hungarian "Ottó Bláthy's patent and named after him, was presented by the Ganz Works at the Frankfurt Fair in the autumn of 1889, and the company was marketing the first induction kilowatt-hour meter by the end of the year. These were the first alternating-current wattmeters, known by the name of Bláthy-meters.
Prototypes of the world's first high efficiency transformers (Széchenyi István Memorial Exhibition, "Nagycenk, Hungary, 1885)
"Ottó Bláthy in the armature of a Ganz turbo generator (1904)
Alternators in a hydroelectric station on the "Murghab River.
Ganz produced engines whose designs were licensed to Western European partners, notably in the United Kingdom and Italy.
Between 1901 and 1908, Ganz Works of Budapest and "de Dion-Bouton of Paris collaborated to build a number of railcars for the Hungarian State Railways together with units with de Dion-Bouton boilers, Ganz steam motors and equipments, and Raba carriages built by the "Raba Hungarian Wagon and Machine Factory in "Győr. In 1908, the Borzsavölgyi Gazdasági Vasút (BGV), a "narrow-gauge railway in Carpathian Ruthenia (today's Ukraine), purchased five railcars from Ganz and four railcars from the Hungarian Royal State Railway Machine Factory with de Dion-Bouton boilers. The Ganz company started to export "steam motor railcars to the United Kingdom, Italy, Canada, Japan, Russia and Bulgaria.
The Ganz Works, having identified the significance of "induction motors and "synchronous motors, commissioned "Kálmán Kandó to develop them. In 1894, Hungarian engineer Kálmán Kandó developed high-voltage "three-phase AC motors and generators for "electric locomotives. The first-ever electric rail vehicle manufactured by Ganz Works was a 6 HP pit locomotive with direct current traction system. The first Ganz made "asynchronous rail vehicles (altogether 2 pieces) were supplied in 1898 to "Évian-les-Bains (France) with a 37 HP asynchronous traction system. The Ganz Works won the tender for electrification of the "Valtellina Railway in Italy in 1897. Under the management, and on the basis of plans from Kálmán Kandó, three phase electric power at 3 kV and 15 Hz was fed through two upper wires and the rails. The electricity was produced in a dedicated power station and the system operated for thirty years from 1902. Italian railways were the first in the world to introduce electric traction for the entire length of a main line rather than just a short stretch. The 106 km Valtellina line was opened on 4 September 1902, designed by Kandó and a team from the Ganz works. The voltage was significantly higher than used earlier and it required new designs for electric motors and switching devices. The three-phase two-wire system was used on several railways in Northern Italy and became known as "the Italian system". Kandó was invited in 1905 to undertake the management of Società Italiana Westinghouse and led the development of several Italian electric locomotives. In 1918, Kandó invented and developed the "rotary phase converter, enabling electric locomotives to use three-phase motors whilst supplied via a single overhead wire, carrying the simple industrial frequency (50 Hz) single phase AC of the high voltage national networks.
After "World War I, at the Ganz Works, Kálmán Kandó constructed a single-phase electric railway system using 16 kV at 50 Hz. A similar system, but using "15 kV at 16.7 Hz, later became widely used in Europe. The main attribute of Kandó's 50 Hz system was that it was fed by the normal power network, so dedicated railway power stations became unnecessary. Because of the early death of Kálmán Kandó, "László Verebélÿ continued the work for the "Hungarian State Railways (MÁV).
In 1959 Ganz merged with the "MÁVAG company and was renamed Ganz-MÁVAG.
In 1976 Ganz-Mávag supplied ten "standard gauge 3-car diesel trainset to the "Hellenic Railways Organisation (OSE), designated as Class AA-91 and four "metre gauge 4-car trainsets, designated as Class A-6451. In 1981/82 Ganz-Mávag supplied to OSE 11 B-B diesel-hydraulic DHM7-9 locomotives, designated as class A-251. Finally, in 1983, OSE bought eleven 3-car metre gauge trainsets, designated as Class A-6461. All these locomotives and trainsets have been withdrawn with the exception of one standard and one metre gauge trainset.["citation needed]
In 1982/83 Ganz-Mávag supplied an order for "electric multiple units to "New Zealand Railways Corporation for Wellington suburban services. The order was made in 1979, and was for 44 powered units and 44 trailer units, see "New Zealand EM class electric multiple unit.["citation needed]
In 1911, The Ganz Company merged with the Danubius shipbuilding company, which was the largest shipbuilding company in Hungary. From 1911, the unified company adopted the "Ganz–Danubius" brand name. As Ganz Danubius, the company became involved in shipbuilding before, and during, "World War I. Ganz was responsible for building the dreadnought "Szent István, all of the "Novara-class cruisers, and built diesel-electric "U-boats at its shipyard in Budapest, for final assembly at "Fiume. Several U-Boats of the "U-XXIX class, "U-XXX class, "U-XXXI class and "U-XXXII class were completed, A number of other types were laid down, but remained incomplete at the war's end. By the end of the First World War, 116 naval vessels had been built by The Ganz-Danubius company. The company built some "ocean liners too.
Film about the construction of SMS Szent István battleship in the Ganz Danubius shipyard in Rijeka in 1912
The battle damaged "SMS Novara (1913) after a victorious naval battle
The world's first "turboprop engine was the "Jendrassik Cs-1 designed by the Hungarian mechanical engineer "György Jendrassik. It was built and tested in the Ganz factory in Budapest between 1939 and 1942. It was planned to be fitted to the Varga RMI-1 X/H twin-engined reconnaissance bomber designed by László Varga in 1940, but the program was cancelled. Jendrassik had also designed a small-scale 75 kW turboprop in 1937.["citation needed]
In 1947, the Ganz Works was nationalised and in 1949 it became independent and six big companies came into existence, including the Ganz Transformer Factory. In 1959, Ganz Wagon and Machine Factory merged with the "MÁVAG Locomotive and Machine Factory under the name of Ganz-MÁVAG Locomotive, Wagon and Machine Works. Of the products of the Works, outstanding results were shown in the field of the manufacture of "diesel railcars and "multiple units. Traditional products included "tramcars as well, and customers included the tramway network of Budapest. In the meantime the Foundry workshop was closed down.
In 1974, the locomotive and wagon Works were merged under the name of Railway Vehicle Factory and then the machine construction branch went through significant development. The production of industrial and apartment house "lifts became a new branch. Ganz-MÁVAG took over a lot of smaller plants in the 1960s and 1970s and their product range was extended. Among other things, they increased their bridge-building capacity. They made iron structures for several "Tisza bridges, for the "Erzsébet Bridge in Budapest, for public road bridges in Yugoslavia and for several industrial halls.
The Ganz Shipyard experienced its most productive times during the four decades following nationalisation. In the course of this period 1100 ship units were produced, the number of completed seagoing ships was 240 and that of floating cranes was 663. As a result of the great economic and social crises of the 1980s, Ganz-MÁVAG had to be reorganised. The company was transformed into seven independent Works and three "joint ventures.
In 1989, the British company Telfos Holdings gained a majority of the shares in Ganz Railway Vehicle Factory Co. Ltd. and the name of the company was changed to Ganz-Hunslet Co. Ltd. In the course of 1991 and 1992, the Austrian company "Jenbacher Werke obtained 100% of the company's shares and consequently the railway vehicle factory is now a member of the international railway vehicle manufacturing group, Jenbacher Transport Systeme. At present, the Ganz Electric Works, under the name of Ganz-Ansaldo is a member of the Italian industrial giant, "AnsaldoBreda. The Ganz Works were transformed into holdings. Ganz-Danubius was wound up in 1994. The Ganz Electric Meter Factory in Gödöllő became the member of the international Schlumberger group.
In 2006, the power transmission and distribution sectors of Ganz Transelektro were acquired by "Crompton Greaves, but still doing business under the Ganz brand name, while the unit dealing with electric traction (propulsion and control systems for electric vehicles) was acquired by "Škoda Transportation and is now a part of "Škoda Electric.
|Wikimedia Commons has media related to Ganz Works.|