Powered by
TTSReader
Share this page on
Article provided by Wikipedia


( => ( => ( => ISO/IEC 15693 [pageid] => 1468909 ) =>

ISO/IEC 15693, is an "ISO standard for vicinity cards, i.e. cards which can be read from a greater distance as compared to "proximity cards.

ISO/IEC 15693 systems operate at the 13.56 MHz "frequency, and offer maximum read distance of 1–1.5 meters. As the vicinity cards have to operate at a greater distance, the necessary "magnetic field is less (0.15 to 5 A/m) than that for a proximity card (1.5 to 7.5 A/m).

Contents

Communication to the card[edit]

Communication from the reader to the card uses an "amplitude-shift keying with 10% or 100% "modulation index.

The data coding is:

1 out of 4 "pulse position modulation
2 bits are coded as the position of a 9.44 µs pause in a 75.52 µs symbol time, giving a bit rate of 26.48 kilo"bits per second. The "least-significant bits are sent first.
1 out of 256 pulse position modulation
8 bits are coded as the position of a 9.44 µs pause in a 4.833 ms symbol time, giving a bit rate of 1.65 kbit/s.

Communication to the reader[edit]

The card has two ways to send its data back to the reader:

Amplitude shift keying[edit]

"Amplitude-shift keying 100% modulation index on a 423.75 kHz "subcarrier. The data rate can be:

A logic 0 starts with eight pulses of 423.75 kHz followed by an unmodulated time of 18.88 µs (256/ fc); a logic 1 is the other way round. The "data frame delimitors are code violations, a start of frame is:

  1. an unmodulated time of 56.64 µs (768/ fc),
  2. 24 pulses of 423.75 kHz
  3. a logic 1

and the end of a frame is:

  1. a logic 0
  2. 24 pulses of 423.75 kHz
  3. an unmodulated time of 56.64 µs

The data are sent using a "Manchester code.

Frequency shift keying[edit]

"Frequency-shift keying by switching between a 423.75 kHz sub carrier (operating frequency divided by 32) and a 484.25 kHz sub carrier (operating frequency divided by 28). The data rate can be:

A logic 0 starts with eight pulses of 423.75 kHz followed by nine pulses of 484.28 kHz; a logic 1 is the other way round. The "data frame delimitors are code violations, a start of frame is:

  1. 27 pulses of 484.28 kHz
  2. 24 pulses of 423.75 kHz
  3. a logic 1

and the end of a frame is:

  1. a logic 0
  2. 24 pulses of 423.75 kHz
  3. 27 pulses of 484.28 kHz

The data are sent using a "Manchester code.

Manufacturer codes[edit]

see "ISO/IEC 7816-6

  1. Code 0x01: Motorola
  2. Code 0x02: ST Microelectronics
  3. Code 0x03: Hitachi
  4. Code 0x04: NXP Semiconductors
  5. Code 0x05: Infineon Technologies
  6. Code 0x06: Cylinc
  7. Code 0x07: Texas Instruments Tag-it™
  8. Code 0x08: Fujitsu Limited
  9. Code 0x09: Matsushita Electric Industrial
  10. Code 0x0A: NEC
  11. Code 0x0B: Oki Electric
  12. Code 0x0C: Toshiba
  13. Code 0x0D: Mitsubishi Electric
  14. Code 0x0E: Samsung Electronics
  15. Code 0x0F: Hyundai Electronics
  16. Code 0x10: LG Semiconductors
  17. Code 0x16: EM Microelectronic-Marin
  18. Code 0x1F: Melexis
  19. Code 0x2B: Maxim
  20. Code 0x33: AMIC

Implementations[edit]

The first byte of the "UID should always be 0xE0. iCLASS family of cards and tags by "HID Global, with a maximum read range 45 centimetres (18 in).

Products with ISO15693 interface[edit]

External links[edit]


) )