Instructional design (ID), or instructional systems design (ISD), is the practice of creating "instructional experiences which make the acquisition of knowledge and skill more efficient, effective, and appealing." The process consists broadly of determining the state and needs of the learner, defining the end goal of instruction, and creating some "intervention" to assist in the transition. The outcome of this instruction may be directly observable and scientifically measured or completely hidden and assumed. There are many instructional design models but many are based on the "ADDIE model with the five phases: analysis, design, development, implementation, and evaluation. As a field, instructional design is historically and traditionally rooted in "cognitive and "behavioral psychology, though recently "constructivism has influenced thinking in the field.
During "World War II, a considerable amount of training materials for the military were developed based on the principles of instruction, learning, and human behavior. Tests for assessing a learner’s abilities were used to screen candidates for the training programs. After the success of military training, psychologists began to view training as a system, and developed various analysis, design, and evaluation procedures. In 1946, "Edgar Dale outlined a hierarchy of instructional methods, organized intuitively by their concreteness.
B. F. Skinner's 1954 article “The Science of Learning and the Art of Teaching” suggested that effective instructional materials, called programmed instructional materials, should include small steps, frequent questions, and immediate feedback; and should allow self-pacing. "Robert F. Mager popularized the use of learning objectives with his 1962 article “Preparing Objectives for Programmed Instruction”. The article describes how to write objectives including desired behavior, learning condition, and assessment. In 1956, a committee led by "Benjamin Bloom published an influential "taxonomy with three domains of learning: cognitive (what one knows or thinks), psychomotor (what one does, physically) and "affective (what one feels, or what "attitudes one has). These taxonomies still influence the design of instruction.
"Robert Glaser introduced “criterion-referenced measures” in 1962. In contrast to norm-referenced tests in which an individual's performance is compared to group performance, a criterion-referenced test is designed to test an individual's behavior in relation to an objective standard. It can be used to assess the learners’ entry level behavior, and to what extent learners have developed mastery through an instructional program.
In 1965, Robert Gagne (see below for more information) described three domains of learning outcomes (cognitive, affective, psychomotor), five learning outcomes (Verbal Information, Intellectual Skills, Cognitive Strategy, Attitude, Motor Skills), and nine events of instruction in “The conditions of Learning”, which remain foundations of instructional design practices. Gagne’s work in learning hierarchies and hierarchical analysis led to an important notion in instruction – to ensure that learners acquire prerequisite skills before attempting superordinate’s ones.
In 1967, after analyzing the failure of training material, Michael Scriven suggested the need for formative assessment – e.g., to try out instructional materials with learners (and revise accordingly) before declaring them finalized.
During the 1970s, the number of instructional design models greatly increased and prospered in different sectors in military, academia, and industry. Many instructional design theorists began to adopt an information-processing-based approach to the design of instruction. David Merrill for instance developed Component Display Theory (CDT), which concentrates on the means of presenting instructional materials (presentation techniques).
Although interest in instructional design continued to be strong in business and the military, there was little evolution of ID in schools or higher education. However, educators and researchers began to consider how the personal computer could be used in a "learning environment or a "learning space. "PLATO (Programmed Logic for Automatic Teaching Operation) is one example of how computers began to be integrated into instruction. Many of the first uses of computers in the classroom were for "drill and skill" exercises. There was a growing interest in how cognitive psychology could be applied to instructional design.
The influence of "constructivist theory on instructional design became more prominent in the 1990s as a counterpoint to the more traditional cognitive learning theory. Constructivists believe that learning experiences should be "authentic" and produce real-world learning environments that allow the learner to construct their own knowledge. This emphasis on the learner was a significant departure away from traditional forms of instructional design.
"Performance improvement was also seen as an important outcome of learning that needed to be considered during the design process. The World Wide Web emerged as an online learning tool with "hypertext and hypermedia being recognized as good tools for learning. As technology advanced and constructivist theory gained popularity, technology’s use in the classroom began to evolve from mostly drill and skill exercises to more interactive activities that required more complex thinking on the part of the learner. Rapid prototyping was first seen during the 1990s. In this process, an instructional design project is prototyped quickly and then vetted through a series of try and revise cycles. This is a big departure from traditional methods of instructional design that took far longer to complete.
In 2008, the Association for Educational Communications and Technology (AECT) changed the definition of Educational Technology to "the study and ethical practice of facilitating learning and improving performance by creating, using, and managing appropriate technological processes and resources." 
Academic degrees focused on integrating technology, internet, and "human-computer interaction with education gained momentum with the introduction of Learning Design and Technology (LDT) majors. Universities such as "Bowling Green State University, "Penn State, "Purdue, "San Diego State University, "Stanford, "Harvard "University of Georgia, California State University, Fullerton and "Carnegie Mellon University have established undergraduate and graduate degrees in technology-centered methods of designing and delivering education.
|1900s||Visual media||School museum as supplementary material (First school museum opened in St. Louis in 1905)||Materials are viewed as supplementary curriculum materials. District-wide media center is the modern equivalent.|
|1914-1923||Visual media films, Slides, Photographer||Visual Instruction Movement||The effect of visual instruction was limited because of teacher resistance to change, quality of the file and cost etc.|
|Mid 1920s to 1930s||Radio broadcasting, Sound recordings, Sound motion pictures||Radio Audiovisual Instruction movement||Education in large was not affected.|
|World War II||Training films, Overhead projector, Slide projector, Audio equipment, Simulators and training devices||Military and industry at this time had strong demand for training.||Growth of audio-visual instruction movement in school was slow, but audiovisual device were used extensively in military services and industry.|
|Post World War II||Communication medium||Suggested to consider all aspects of a communication process (influenced by communication theories).||This view point was first ignored, but eventually helped to expand the focus of the audiovisual movement.|
|1950s to mid-1960s||Television||Growth of Instructional television||Instructional television was not adopted to a greater extent.|
|1950s-1990s||Computer||Computer-assisted instruction (CAI) research started in the 1950s, became popular in the 1980s a few years after computers became available to general public.||The effect of CAI was rather small and the use of computer was far from innovative.|
|1990s-2000s||Internet, Simulation||The internet offered opportunities to train many people long distances. Desktop simulation gave advent to levels of Interactive Multimedia Instruction (IMI).||Online training increased rapidly to the point where entire curriculums were given through web-based training. Simulations are valuable but expensive, with the highest level being used primarily by the military and medical community.|
|2000s-2010s||Mobile Devices, Social Media||On-demand training moved to people's personal devices; social media allowed for collaborative learning.||The effect from both are too new to be fully measured.|
Robert Gagné's work is widely used and cited in the design of instruction, as exemplified by more than 130 citations in prominent journals in the field during the period from 1985 through 1990. Synthesizing ideas from behaviorism and cognitivism, he provided a clear template, which is easy to follow for designing instructional events. Instructional designers who follow Gagné's theory will likely have tightly focused, efficient instruction.
According to Gagné, learning occurs in a series of learning events. Each of nine learning events are conditions for learning which must be accomplished before the next in order for learning to take place, termed . Similarly, instructional events should mirror the learning events:
Some educators believe that Gagné's taxonomy of learning outcomes and events of instruction oversimplify the learning process by over-prescribing. However, using them as part of a complete instructional package can assist many educators in becoming more organized and staying focused on the instructional goals.
Robert Gagné’s work has been the foundation of instructional design since the beginning of the 1960s when he conducted research and developed training materials for the military. Among the first to coin the term “instructional design”, Gagné developed some of the earliest instructional design models and ideas. These models have laid the groundwork for more present-day instructional design models from theorists like Dick, Carey, and Carey (The Dick and Carey Systems Approach Model), Jerold Kemp’s Instructional Design Model, and David Merrill (Merrill’s First Principle of Instruction). Each of these models are based on a core set of learning phases that include (1) activation of prior experience, (2) demonstration of skills, (3) application of skills, and (4) integration or these skills into real world activities. The figure below illustrates these five ideas.
Gagné's main focus for instructional design was how instruction and learning could be systematically connected to the design of instruction. He emphasized the design principles and procedures that need to take place for effective teaching and learning. His initial ideas, along with the ideas of other early instructional designers were outlined in Psychological Principles in Systematic Development, written by Roberts B. Miller and edited by Gagné. Gagné believed in internal learning and motivation which paved the way for theorists like Merrill, Li, and Jones who designed the Instructional Transaction Theory, Reigeluth and Stein’s Elaboration Theory, and most notably, Keller’s "ARCS Model of Motivation and Design.
Prior to Robert Gagné, learning was often thought of as a single, uniform process. There was little or no distinction made between “learning to load a rifle and learning to solve a complex mathematical problem”. Gagné offered an alternative view which developed the idea that different learners required different learning strategies. Understanding and designing instruction based on a learning style defined by the individual brought about new theories and approaches to teaching. Gagné 's understanding and theories of human learning added significantly to understanding the stages in cognitive processing and instructions. For example, Gagné argued that instructional designers must understand the characteristics and functions of short-term and long-term memory to facilitate meaningful learning. This idea encouraged instructional designers to include cognitive needs as a top-down instructional approach.
Gagné (1966) defines curriculum as a sequence of content units arranged in such a way that the learning of each unit may be accomplished as a single act, provided the capabilities described by specified prior units (in the sequence) have already been mastered by the learner.
His definition of curriculum has been the basis of many important initiatives in schools and other educational environments. In the late 1950s and early 1960s, Gagné had expressed and established an interest in applying theory to practice with particular interest in applications for teaching, training and learning. Increasing the effectiveness and efficiency of practice was of particular concern. His ongoing attention to practice while developing theory continues to influence education and training.
Gagné's work has had a significant influence on American education, and military and industrial training. Gagné was one of the early developers of the concept of instructional systems design which suggests the components of a lesson can be analyzed and should be designed to operate together as an integrated plan for instruction. In "Educational Technology and the Learning Process" (Educational Researcher, 1974), Gagné defined instruction as "the set of planned external events which influence the process of learning and thus promote learning.".
The concept of learning design arrived in the literature of technology for education in the late 1990s and early 2000s with the idea that "designers and instructors need to choose for themselves the best mixture of behaviourist and constructivist learning experiences for their online courses". But the concept of learning design is probably as old as the concept of teaching. Learning design might be defined as "the description of the teaching-learning process that takes place in a unit of learning (e.g., a course, a lesson or any other designed learning event)".
As summarized by Britain, learning design may be associated with:
Perhaps the most common model used for creating instructional materials is the "ADDIE Model. This acronym stands for the 5 phases contained in the model (Analyze, Design, Develop, Implement, and Evaluate).
Brief History of ADDIE’s Development – The ADDIE model was initially developed by Florida State University to explain “the processes involved in the formulation of an instructional systems development (ISD) program for military interservice training that will adequately train individuals to do a particular job and which can also be applied to any interservice curriculum development activity.” The model originally contained several steps under its five original phases (Analyze, Design, Develop, Implement, and [Evaluation and] Control), whose completion was expected before movement to the next phase could occur. Over the years, the steps were revised and eventually the model itself became more dynamic and interactive than its original hierarchical rendition, until its most popular version appeared in the mid-80s, as we understand it today.
The five phases are listed and explained below:
Analyze – The first phase of content development is Analysis. Analysis refers to the gathering of information about one’s audience, the tasks to be completed, how the learners will view the content, and the project’s overall goals. The instructional designer then classifies the information to make the content more applicable and successful.
Design – The second phase is the Design phase. In this phase, instructional designers begin to create their project. Information gathered from the analysis phase, in conjunction with the theories and models of instructional design, is meant to explain how the learning will be acquired. For example, the design phase begins with writing a learning objective. Tasks are then identified and broken down to be more manageable for the designer. The final step determines the kind of activities required for the audience in order to meet the goals identified in the Analyze phase.
Develop – The third phase, Development, involves the creation of the activities that will be implemented. It is in this stage that the blueprints of the design phase are assembled.
Implement – After the content is developed, it is then Implemented. This stage allows the instructional designer to test all materials to determine if they are functional and appropriate for the intended audience.
Evaluate – The final phase, Evaluate, ensures the materials achieved the desired goals. The evaluation phase consists of two parts: formative and summative assessment. The ADDIE model is an iterative process of instructional design, which means that at each stage the designer can assess the project's elements and revise them if necessary. This process incorporates "formative assessment, while the "summative assessments contain tests or evaluations created for the content being implemented. This final phase is vital for the instructional design team because it provides data used to alter and enhance the design.
Connecting all phases of the model are external and reciprocal revision opportunities. As in the internal Evaluation phase, revisions should and can be made throughout the entire process.
Most of the current instructional design models are variations of the ADDIE process.
An adaptation of the ADDIE model, which is used sometimes, is a practice known as "rapid prototyping.
Proponents suggest that through an iterative process the verification of the design documents saves time and money by catching problems while they are still easy to fix. This approach is not novel to the design of instruction, but appears in many design-related domains including software design, architecture, transportation planning, product development, message design, user experience design, etc. In fact, some proponents of design prototyping assert that a sophisticated understanding of a problem is incomplete without creating and evaluating some type of prototype, regardless of the analysis rigor that may have been applied up front. In other words, up-front analysis is rarely sufficient to allow one to confidently select an instructional model. For this reason many traditional methods of instructional design are beginning to be seen as incomplete, naive, and even counter-productive.
However, some consider rapid prototyping to be a somewhat simplistic type of model. As this argument goes, at the heart of Instructional Design is the analysis phase. After you thoroughly conduct the analysis—you can then choose a model based on your findings. That is the area where most people get snagged—they simply do not do a thorough-enough analysis. (Part of Article By Chris Bressi on LinkedIn)
Another well-known instructional design model is The Dick and Carey Systems Approach Model. The model was originally published in 1978 by Walter Dick and Lou Carey in their book entitled The Systematic Design of Instruction.
Dick and Carey made a significant contribution to the instructional design field by championing a systems view of instruction, in contrast to defining instruction as the sum of isolated parts. The model addresses instruction as an entire system, focusing on the interrelationship between context, content, learning and instruction. According to Dick and Carey, "Components such as the instructor, learners, materials, instructional activities, delivery system, and learning and performance environments interact with each other and work together to bring about the desired student learning outcomes". The components of the Systems Approach Model, also known as the Dick and Carey Model, are as follows:
With this model, components are executed iteratively and in parallel, rather than linearly.
The instructional design model, Guaranteed Learning, was formerly known as the Instructional Development Learning System (IDLS). The model was originally published in 1970 by Peter J. Esseff, PhD and Mary Sullivan Esseff, PhD in their book entitled IDLS—Pro Trainer 1: How to Design, Develop, and Validate Instructional Materials.
Peter (1968) & Mary (1972) Esseff both received their doctorates in Educational Technology from the Catholic University of America under the mentorship of Dr. Gabriel Ofiesh, a founding father of the Military Model mentioned above. Esseff and Esseff synthesized existing theories to develop their approach to systematic design, "Guaranteed Learning" aka "Instructional Development Learning System" (IDLS). In 2015, the Drs. Esseffs created an eLearning course to enable participants to take the GL course online under the direction of Dr. Esseff.
The components of the Guaranteed Learning Model are the following:
Other useful instructional design models include: the Smith/Ragan Model, the Morrison/Ross/Kemp Model and the OAR Model of instructional design in higher education, as well as, Wiggins' theory of "backward design.
Learning theories also play an important role in the design of instructional materials. Theories such as "behaviorism, "constructivism, "social learning and "cognitivism help shape and define the outcome of instructional materials.
Motivation is defined as an internal drive that activates behavior and gives it direction. The term motivation theory is concerned with the process that describe why and how human behavior is activated and directed.
Intrinsic and Extrinsic Motivation
John Keller has devoted his career to researching and understanding motivation in instructional systems. These decades of work constitute a major contribution to the instructional design field. First, by applying motivation theories systematically to design theory. Second, in developing a unique problem-solving process he calls the ARCS Motivation....
The ARCS Model of Motivational Design was created by John Keller while he was researching ways to supplement the learning process with motivation. The model is based on Tolman's and Lewin's expectancy-value theory, which presumes that people are motivated to learn if there is value in the knowledge presented (i.e. it fulfills personal needs) and if there is an optimistic expectation for success. The model consists of four main areas: Attention, Relevance, Confidence, and Satisfaction.
Attention and relevance according to John Keller's ARCS motivational theory are essential to learning. The first 2 of 4 key components for motivating learners, attention, and relevance can be considered the backbone of the ARCS theory, the latter components relying upon the former.
The attention mentioned in this theory refers to the interest displayed by learners in taking in the concepts/ideas being taught. This component is split into three categories: perceptual arousal, using surprise or uncertain situations; inquiry arousal, offering challenging questions and/or problems to answer/solve; and variability, using a variety of resources and methods of teaching. Within each of these categories, John Keller has provided further sub-divisions of types of stimuli to grab attention. Grabbing attention is the most important part of the model because it initiates the motivation for the learners. Once learners are interested in a topic, they are willing to invest their time, pay attention, and find out more.
Relevance, according to Keller, must be established by using language and examples that the learners are familiar with. The three major strategies Keller presents are goal-oriented, motive matching, and familiarity. Like the Attention category, Keller divided the three major strategies into subcategories, which provide examples of how to make a lesson plan relevant to the learner. Learners will throw concepts to the wayside if their attention cannot be grabbed and sustained and if relevance is not conveyed.
The confidence aspect of the ARCS model focuses on establishing positive expectations for achieving success among learners. The confidence level of learners is often correlated with motivation and the amount of effort put forth in reaching a performance objective. For this reason, it's important that learning design provides students with a method for estimating their probability of success. This can be achieved in the form of a syllabus and grading policy, rubrics, or a time estimate to complete tasks. Additionally, confidence is built when positive reinforcement for personal achievements is given through timely, relevant feedback.
Finally, learners must obtain some type of satisfaction or reward from a learning experience. This satisfaction can be from a sense of achievement, praise from a higher-up, or mere entertainment. Feedback and reinforcement are important elements and when learners appreciate the results, they will be motivated to learn. Satisfaction is based upon motivation, which can be intrinsic or extrinsic. To keep learners satisfied, instruction should be designed to allow them to use their newly learned skills as soon as possible in as authentic a setting as possible.
Along with the motivational components (Attention, Relevance, Confidence, and Satisfaction) the ARCS model provides a process that can address motivational problems. This process has 4 phases (Analysis, Design, Development, and Evaluation) with 10 steps within the phases:
Obtain course information
Obtain audience information
Analyze existing materials
List objectives and assessments
List potential tactics
Select and design tactics
Integrate with instruction
Select and develop materials
Evaluate and revise
Step 1: Obtain course information
Includes reviewing the description of the course, the instructor, and way of delivery the information.
Step 2: Obtain audience information
Includes collecting the current skill level, attitudes towards the course, attitudes towards the teacher, attitudes towards the school.
Step 3: Analyze audience
This should help identify the motivational problem that needs to be addressed.
Step 4: Analyze existing materials
Identifying positives of the current instruction l material, as well as any problems.
Step 5: List objectives and assessments
This allows the creation of assessment tools that align with the objections.
Step 6: List potential tactics
Brainstorming possible tactics that could fill in the motivational gaps.
Step 7: Select and design tactics
Integrates, enhances, and sustains tactics from the list that fit the situation.
Step 8: Integrate with instruction
Integrate the tactic that was chosen from the list into the instruction.
Step 9: Select and develop materials
Select materials, modify to fit the situation and develop new materials.
Step 10: Evaluate and revise
Obtain reactions from the learner and determine satisfaction level.
Although Keller's ARCS model currently dominates instructional design with respect to learner motivation, in 2006 Hardré and Miller proposed a need for a new design model that includes current research in human motivation, a comprehensive treatment of motivation, integrates various fields of psychology and provides designers the flexibility to be applied to a myriad of situations.
Hardré proposes an alternate model for designers called the Motivating Opportunities Model or MOM. Hardré's model incorporates cognitive, needs, and affective theories as well as social elements of learning to address learner motivation. MOM has seven key components spelling the acronym 'SUCCESS' – Situational, Utilization, Competence, Content, Emotional, Social, and Systemic.
||This article contains "embedded lists that may be poorly defined, "unverified or "indiscriminate. (December 2010)|
Alphabetic by last name
ADDIE - Effective Instructional Design Model - Compliant Learning Resources https://compliantlearningresources.com.au/blog/effective-instructional-design-model-training-organisations-addie/
|Wikiversity has learning resources about Instructional design|