|Appearance||lustrous metallic with a grayish tinge|
|"Standard atomic weight (Ar, standard)||55.845(2)|
|Iron in the "periodic table|
|"Atomic number (Z)||26|
|"Group, "period||"group 8, "period 4|
|"Element category||transition metal"|
|"Electron configuration||["Ar] 3d6 4s2|
Electrons per shell
|2, 8, 14, 2|
|"Phase (at "STP)||"solid|
|"Melting point||1811 "K (1538 °C, 2800 °F)|
|"Boiling point||3134 K (2862 °C, 5182 °F)|
|"Density (near r.t.)||7.874 g/cm3|
|when liquid (at m.p.)||6.98 g/cm3|
|"Heat of fusion||13.81 "kJ/mol|
|"Heat of vaporization||340 kJ/mol|
|"Molar heat capacity||25.10 J/(mol·K)|
|"Oxidation states||−4, −2, −1, +1, +2, +3, +4, +5, +6, +7
|"Electronegativity||Pauling scale: 1.83|
|"Atomic radius||empirical: 126 "pm|
|"Covalent radius||Low spin: 132±3 pm
High spin: 152±6 pm
|"Crystal structure||"body-centered cubic (bcc)
|Crystal structure||"face-centered cubic (fcc)
between 1185–1667 K
|"Speed of sound thin rod||5120 m/s (at r.t.) (electrolytic)|
|"Thermal expansion||11.8 µm/(m·K) (at 25 °C)|
|"Thermal conductivity||80.4 W/(m·K)|
|"Electrical resistivity||96.1 nΩ·m (at 20 °C)|
|"Curie point||1043 K|
|"Young's modulus||211 GPa|
|"Shear modulus||82 GPa|
|"Bulk modulus||170 GPa|
|"Vickers hardness||608 MPa|
|"Brinell hardness||200–1180 MPa|
|"Discovery||before "5000 BC|
|Main "isotopes of iron|
Iron is a "chemical element with symbol Fe (from "Latin: ferrum) and "atomic number 26. It is a "metal in the "first transition series. It is by mass the most common element on "Earth, forming much of Earth's "outer and "inner core. It is the fourth most common "element in the Earth's crust. Its abundance in "rocky planets like Earth is due to its abundant production by "fusion in high-mass "stars, where it is the last element to be produced with release of energy before the violent collapse of a "supernova, which scatters the iron into space.
Like the other "group 8 elements, "ruthenium and "osmium, iron exists in a wide range of "oxidation states, −2 to +7, although +2 and +3 are the most common. Elemental iron occurs in "meteoroids and other low "oxygen environments, but is reactive to oxygen and "water. Fresh iron surfaces appear lustrous silvery-gray, but "oxidize in normal air to give "hydrated "iron oxides, commonly known as "rust. Unlike the metals that form "passivating oxide layers, iron oxides occupy more volume than the metal and thus flake off, exposing fresh surfaces for corrosion.
Iron metal has been used since "ancient times, although "copper alloys, which have lower melting temperatures, were used even earlier in human history. Pure iron is relatively soft, but is unobtainable by "smelting because it is significantly hardened and strengthened by impurities, in particular "carbon, from the smelting process. A certain proportion of carbon (between 0.002% and 2.1%) produces "steel, which may be up to 1000 times harder than pure iron. Crude iron metal is produced in "blast furnaces, where ore is reduced by "coke to "pig iron, which has a high carbon content. Further refinement with oxygen reduces the carbon content to the correct proportion to make steel. Steels and iron "alloys formed with other metals ("alloy steels) are by far the most common industrial metals because they have a great range of desirable properties and iron-bearing rock is abundant.
Iron chemical compounds have many uses. Iron oxide mixed with aluminium powder can be ignited to create a "thermite reaction, used in welding and purifying ores. Iron forms binary compounds with the "halogens and the "chalcogens. Among its organometallic compounds is "ferrocene, the first "sandwich compound discovered.
"Iron plays an important role in biology, forming complexes with molecular oxygen in "hemoglobin and "myoglobin; these two compounds are common "oxygen transport proteins in vertebrates. Iron is also the metal at the active site of many important "redox "enzymes dealing with "cellular respiration and "oxidation and reduction in plants and animals. A human male of average height has about 4 grams of iron in his body, a female about 3.5 grams. This iron is distributed throughout the body in "hemoglobin, tissues, muscles, bone marrow, blood proteins, enzymes, "ferritin, "hemosiderin, and transport in plasma.
|Pure, single-crystal iron||10||3|
The mechanical properties of iron and its alloys can be evaluated using a variety of tests, including the "Brinell test, "Rockwell test and the "Vickers hardness test. The data on iron is so consistent that it is often used to calibrate measurements or to compare tests. However, the mechanical properties of iron are significantly affected by the sample's purity: pure, single crystals of iron are actually softer than aluminium, and the purest industrially produced iron (99.99%) has a hardness of 20–30 Brinell. An increase in the carbon content will cause a significant increase in the hardness and tensile strength of iron. Maximum hardness of "65 Rc is achieved with a 0.6% carbon content, although the alloy has low tensile strength. Because of the softness of iron, it is much easier to work with than its heavier congeners "ruthenium and "osmium.
Because of its significance for planetary cores, the physical properties of iron at high pressures and temperatures have also been studied extensively. The form of iron that is stable under standard conditions can be subjected to pressures up to ca. 15 GPa before transforming into a high-pressure form, as described in the next section.
Iron represents an example of "allotropy in a metal. There are at least four allotropic forms of iron, known as α, γ, δ, and ε; at very high pressures and temperatures, some controversial experimental evidence exists for a stable β phase.
As molten iron cools past its freezing point of 1538 °C, it crystallizes into its δ allotrope, which has a "body-centered cubic (bcc) "crystal structure. As it cools further to 1394 °C, it changes to its γ-iron allotrope, a "face-centered cubic (fcc) crystal structure, or "austenite. At 912 °C and below, the crystal structure again becomes the bcc α-iron allotrope, or "ferrite. Finally, at 770 °C (the "Curie point, Tc) iron's magnetic ordering changes from "paramagnetic to "ferromagnetic. As the iron passes through the Curie temperature there is no change in crystalline structure, but there is a change in "domain structure", where each domain contains iron atoms with a particular electronic spin. In unmagnetized iron, all the electronic spins of the atoms within one domain have the same axis orientation; however, the electrons of neighboring domains have other orientations with the result of mutual cancellation and no magnetic field. In magnetized iron, the electronic spins of the domains are aligned and the magnetic effects are reinforced. Although each domain contains billions of atoms, they are very small, about 10 micrometres across. This happens because the two unpaired electrons on each iron atom are in the dz2 and dx2 − y2 orbitals, which do not point directly at the nearest neighbors in the body-centered cubic lattice and therefore do not participate in metallic bonding; thus, they can interact magnetically with each other so that their spins align.
At pressures above approximately 10 GPa and temperatures of a few hundred kelvin or less, α-iron changes into a "hexagonal close-packed (hcp) structure, which is also known as "ε-iron; the higher-temperature γ-phase also changes into ε-iron, but does so at higher pressure. The "β-phase, if it exists, would appear at pressures of at least 50 GPa and temperatures of at least 1500 K and have an orthorhombic or a double hcp structure. These high-pressure phases of iron are important as endmember models for the solid parts of planetary cores. The "inner core of the "Earth is generally presumed to be an iron-"nickel "alloy with ε (or β) structure. Somewhat confusingly, the term "β-iron" is sometimes also used to refer to α-iron above its Curie point, when it changes from being ferromagnetic to paramagnetic, even though its crystal structure has not changed.
The melting point of iron is experimentally well defined for pressures less than 50 GPa. For greater pressures, studies put the γ-ε-liquid "triple point at pressures that differ by tens of gigapascals and 1000 K in the melting point. Generally speaking, "molecular dynamics computer simulations of iron melting and shock wave experiments suggest higher melting points and a much steeper slope of the melting curve than static experiments carried out in "diamond anvil cells. The melting and boiling points of iron, along with its "enthalpy of atomization, are lower than those of the earlier 3d elements from "scandium to "chromium, showing the lessened contribution of the 3d electrons to metallic bonding as they are attracted more and more into the inert core by the nucleus; however, they are higher than the values for the previous element "manganese because that element has a half-filled 3d subshell and consequently its d-electrons are not easily delocalized. This same trend appears for ruthenium but not osmium.
Naturally occurring iron consists of four stable "isotopes: 5.845% of 54Fe, 91.754% of "56Fe, 2.119% of 57Fe and 0.282% of 58Fe. Of these stable isotopes, only 57Fe has a nuclear "spin (−1⁄2). The "nuclide 54Fe theoretically can undergo "double electron capture to 54Cr, but the process has never been observed and only a lower limit on the half-life of 3.1×1022 years has been established.
60Fe is an "extinct radionuclide of long "half-life (2.6 million years). It is not found on Earth, but its ultimate decay product is its granddaughter, the stable nuclide "60Ni. Much of the past work on isotopic composition of iron has focused on the "nucleosynthesis of 60Fe through studies of "meteorites and ore formation. In the last decade, advances in "mass spectrometry have allowed the detection and quantification of minute, naturally occurring variations in the ratios of the "stable isotopes of iron. Much of this work is driven by the "Earth and "planetary science communities, although applications to biological and industrial systems are emerging.
In phases of the meteorites Semarkona and Chervony Kut, a correlation between the concentration of 60Ni, the "granddaughter of 60Fe, and the abundance of the stable iron isotopes provided evidence for the existence of 60Fe at the time of "formation of the Solar System. Possibly the energy released by the decay of 60Fe, along with that released by "26Al, contributed to the remelting and "differentiation of "asteroids after their formation 4.6 billion years ago. The abundance of 60Ni present in extraterrestrial material may bring further insight into the origin and early history of the "Solar System.
The most abundant iron isotope 56Fe is of particular interest to nuclear scientists because it represents the most common endpoint of "nucleosynthesis. Since 56Ni (14 "alpha particles) is easily produced from lighter nuclei in the "alpha process in "nuclear reactions in supernovae (see "silicon burning process), it is the endpoint of fusion chains inside "extremely massive stars, since addition of another alpha particle, resulting in 60Zn, requires a great deal more energy. This 56Ni, which has a half-life of about 6 days, is created in quantity in these stars, but soon decays by two successive positron emissions within supernova decay products in the "supernova remnant gas cloud, first to radioactive 56Co, and then to stable 56Fe. As such, iron is the most abundant element in the core of "red giants, and is the most abundant metal in "iron meteorites and in the dense metal "cores of planets such as "Earth. It is also very common in the universe, relative to other stable "metals of approximately the same "atomic weight. Iron is the sixth most "abundant element in the "Universe, and the most common "refractory element.
Although a further tiny energy gain could be extracted by synthesizing "62Ni, which has a marginally higher binding energy than 56Fe, conditions in stars are unsuitable for this process. Element production in supernovas and distribution on Earth greatly favor iron over nickel, and in any case, 56Fe still has a lower mass per nucleon than 62Ni due to its higher fraction of lighter protons. Hence, elements heavier than iron require a "supernova for their formation, involving "rapid neutron capture by starting 56Fe nuclei.
In the "far future of the universe, assuming that "proton decay does not occur, cold "fusion occurring via "quantum tunnelling would cause the light nuclei in ordinary matter to fuse into 56Fe nuclei. Fission and "alpha-particle emission would then make heavy nuclei decay into iron, converting all stellar-mass objects to cold spheres of pure iron.
Metallic or "native iron is rarely found on the surface of the Earth because it tends to oxidize, but its oxides are pervasive and represent the primary ores. While it makes up about 5% of the "Earth's crust, both the Earth's "inner and "outer core are believed to consist largely of an iron-"nickel alloy constituting 35% of the mass of the Earth as a whole. Iron is consequently the most abundant element on Earth, but only the fourth most abundant element in the Earth's crust, after "oxygen, "silicon, and "aluminium. Most of the iron in the crust is found combined with oxygen as "iron oxide minerals such as "hematite (Fe2O3), "magnetite (Fe3O4), and "siderite (FeCO3). Many "igneous rocks also contain the sulfide minerals "pyrrhotite and "pentlandite.
"Ferropericlase (Mg,Fe)O, a solid solution of "periclase (MgO) and "wüstite (FeO), makes up about 20% of the volume of the "lower mantle of the Earth, which makes it the second most abundant mineral phase in that region after silicate "perovskite (Mg,Fe)SiO3; it also is the major host for iron in the lower mantle. At the bottom of the "transition zone of the mantle, the reaction γ-(Mg,Fe)2[SiO4] ↔ (Mg,Fe)[SiO3] + (Mg,Fe)O transforms "γ-olivine into a mixture of perovskite and ferropericlase and vice versa. In the literature, this mineral phase of the lower mantle is also often called magnesiowüstite. "Silicate perovskite may form up to 93% of the lower mantle, and the magnesium iron form, (Mg,Fe)SiO3, is considered to be the most abundant "mineral in the Earth, making up 38% of its volume.
Large deposits of iron are found in "banded iron formations. These geological formations are a type of rock consisting of repeated thin layers of iron oxides alternating with bands of iron-poor "shale and "chert. The banded iron formations were laid down in the time between and .
The mentioned iron compounds have been used as "pigments (compare "ochre) since historical time and contribute as well to the color of various geological formations, e.g. the "Buntsandstein (British "Bunter, colored sandstein). In the case of the Eisensandstein (a jurassic 'iron sandstone', e.g. from "Donzdorf) in Germany and "Bath stone in the UK, iron pigments contribute to the yellowish color of large amounts of historical buildings and sculptures. The proverbial "red color of the surface of Mars is derived from an iron oxide-rich "regolith.
Significant amounts of iron occur in the iron sulfide mineral "pyrite (FeS2), but it is difficult to extract iron from it and it is therefore not used. In fact, iron is so common that production generally focuses only on ores with very high quantities of it. During "weathering, iron tends to leach from sulfide deposits as the sulfate and from silicate deposits as the bicarbonate. Both of these are oxidized in aqueous solution and precipitate in even mildly elevated pH as "iron(III) oxide.
About 1 in 20 "meteorites consist of the unique iron-nickel minerals "taenite (35–80% iron) and "kamacite (90–95% iron). Although rare, "iron meteorites are the main form of natural metallic iron on the Earth's surface. According to the "International Resource Panel's "Metal Stocks in Society report, the global stock of iron in use in society is 2200 kg per capita. Much of this is in more-developed countries (7000–14000 kg per capita) rather than less-developed countries (2000 kg per capita).
|−2 (d10)||"Disodium tetracarbonylferrate (Collman's reagent)|
|0 (d8)||"Iron pentacarbonyl|
|1 (d7)||"Cyclopentadienyliron dicarbonyl dimer ("Fp2")|
|2 (d6)||"Ferrous sulfate, "ferrocene|
|3 (d5)||"Ferric chloride, "ferrocenium tetrafluoroborate|
|6 (d2)||"Potassium ferrate|
|7 (d1)||[FeO4]– (matrix isolation, 4K)|
Iron shows the characteristic chemical properties of the "transition metals, namely the ability to form variable oxidation states differing by steps of one and a very large coordination and organometallic chemistry: indeed, it was the discovery of an iron compound, "ferrocene, that revolutionalized the latter field in the 1950s. Iron is sometimes considered as a prototype for the entire block of transition metals, due to its abundance and the immense role it has played in the technological progress of humanity. Its 26 electrons are arranged in the "configuration [Ar]3d64s2, of which the 3d and 4s electrons are relatively close in energy, and thus it can lose a variable number of electrons and there is no clear point where further ionization becomes unprofitable.
Iron forms compounds mainly in the +2 and +3 "oxidation states. Traditionally, iron(II) compounds are called "ferrous, and iron(III) compounds "ferric. Iron also occurs in "higher oxidation states, an example being the purple "potassium ferrate (K2FeO4) which contains iron in its +6 oxidation state, although this is very easily reduced. Although iron(VIII) oxide (FeO4) has been claimed, the report could not be reproduced and such a species (at least with iron in its +8 oxidation state) has been found to be improbable computationally. However, one form of anionic [FeO4]– with iron in its +7 oxidation state, along with an iron(V)-peroxo isomer, has been detected by infrared spectroscopy at 4 K after cocondensation of laser-ablated Fe atoms with a mixture of O2/Ar. Iron(IV) is a common intermediate in many biochemical oxidation reactions. Numerous "organometallic compounds contain formal oxidation states of +1, 0, −1, or even −2. The oxidation states and other bonding properties are often assessed using the technique of "Mössbauer spectroscopy. There are also many "mixed valence compounds that contain both iron(II) and iron(III) centers, such as "magnetite and "Prussian blue (Fe4(Fe[CN]6)3). The latter is used as the traditional "blue" in "blueprints.
Iron is the first of the transition metals that cannot reach its group oxidation state of +8, although its heavier congeners ruthenium and osmium can, with ruthenium having more difficulty than osmium. Ruthenium exhibits an aqueous cationic chemistry in its low oxidation states similar to that of iron, but osmium does not, favoring high oxidation states in which it forms anionic complexes. In fact, in this second half of the 3d transition series, vertical similarities down the groups compete with the horizontal similarities of iron with its neighbors "cobalt and "nickel in the periodic table, which are also ferromagnetic at "room temperature and share similar chemistry. As such, iron, cobalt, and nickel are sometimes grouped together as the "iron triad.
The iron compounds produced on the largest scale in industry are "iron(II) sulfate (FeSO4·7"H2O) and "iron(III) chloride (FeCl3). The former is one of the most readily available sources of iron(II), but is less stable to aerial oxidation than "Mohr's salt ((NH4)2Fe(SO4)2·6H2O). Iron(II) compounds tend to be oxidized to iron(III) compounds in the air.
Iron is by far the most reactive element in its group; it is pyrophoric when finely divided and dissolves easily in dilute acids, giving Fe2+. However, it does not react with concentrated "nitric acid and other oxidizing acids due to the formation of an impervious oxide layer, which can nevertheless react with "hydrochloric acid.
Iron reacts with oxygen in the air to form various "oxide and hydroxide compounds; the most common are "iron(II,III) oxide (Fe3O4), and "iron(III) oxide (Fe2O3). "Iron(II) oxide also exists, though it is unstable at room temperature. Despite their names, they are actually all "non-stoichiometric compounds whose compositions may vary. These oxides are the principal ores for the production of iron (see "bloomery and blast furnace). They are also used in the production of "ferrites, useful "magnetic storage media in computers, and pigments. The best known sulfide is "iron pyrite (FeS2), also known as fool's gold owing to its golden luster. It is not an iron(IV) compound, but is actually an iron(II) "polysulfide containing Fe2+ and S2−
2 ions in a distorted "sodium chloride structure.
The binary ferrous and ferric halides are well-known, with the exception of ferric iodide. The ferrous halides typically arise from treating iron metal with the corresponding "hydrohalic acid to give the corresponding hydrated salts.
Ferric iodide is an exception, being thermodynamically unstable due to the oxidizing power of Fe3+ and the high reducing power of I−:
Nevertheless, milligram amounts of ferric iodide, a black solid, may still be prepared through the reaction of "iron pentacarbonyl with "iodine and "carbon monoxide in the presence of "hexane and light at the temperature of −20 °C, making sure that the system is well sealed off from air and water.
|Fe2+ + 2 e−||⇌ Fe||E0 = −0.447 V|
|Fe3+ + 3 e−||⇌ Fe||E0 = −0.037 V|
4 + 8 H+ + 3 e−
|⇌ Fe3+ + 4 H2O||E0 = +2.20 V|
The Fe3+ ion has a large simple cationic chemistry, although the pale-violet hexaquo ion [Fe(H2O)6]3+ is very readily hydrolyzed when pH increases above 0 as follows:
|[Fe(H2O)6]3+||⇌ [Fe(H2O)5(OH)]2+ + H+||"K = 10−3.05 mol dm−3|
|[Fe(H2O)5(OH)]2+||⇌ [Fe(H2O)4(OH)2]+ + H+||K = 10−3.26 mol dm−3|
|2 [Fe(H2O)6]3+||⇌ [Fe(H
2 + 2 H+ + 2 H2O
|K = 10−2.91 mol dm−3|
As pH rises above 0 the above yellow hydrolyzed species form and as it rises above 2–3, reddish-brown hydrous "iron(III) oxide precipitates out of solution. Although Fe3+ has an d5 configuration, its absorption spectrum is not like that of Mn2+ with its weak, spin-forbidden d–d bands, because Fe3+ has higher positive charge and is more polarizing, lowering the energy of its ligand-to-metal "charge transfer absorptions. Thus, all the above complexes are rather strongly colored, with the single exception of the hexaquo ion – and even that has a spectrum dominated by charge transfer in the near ultraviolet region. On the other hand, the pale green iron(II) hexaquo ion [Fe(H2O)6]2+ does not undergo appreciable hydrolysis. Carbon dioxide is not evolved when "carbonate anions are added, which instead results in white "iron(II) carbonate being precipitated out. In excess carbon dioxide this forms the slightly soluble bicarbonate, which occurs commonly in groundwater, but it oxidises quickly in air to form "iron(III) oxide that accounts for the brown deposits present in a sizeable number of streams.
Many coordination compounds of iron are known. A typical six-coordinate anion is hexachloroferrate(III), [FeCl6]3−, found in the mixed "salt "tetrakis(methylammonium) hexachloroferrate(III) chloride. Complexes with multiple bidentate ligands have "geometric isomers. For example, the trans-"chlorohydridobis(bis-1,2-(diphenylphosphino)ethane)iron(II) complex is used as a starting material for compounds with the Fe("dppe)2 "moiety. The ferrioxalate ion with three "oxalate ligands (shown at right) displays "helical chirality with its two non-superposable geometries labelled Λ (lambda) for the left-handed screw axis and Δ (delta) for the right-handed screw axis, in line with IUPAC conventions. "Potassium ferrioxalate is used in chemical "actinometry and along with its "sodium salt undergoes "photoreduction applied in old-style photographic processes. The "dihydrate of "iron(II) oxalate has a "polymeric structure with co-planar oxalate ions bridging between iron centres with the water of crystallisation located forming the caps of each octahedron, as illustrated below.
"Prussian blue, Fe4[Fe(CN)6]3, is the most famous of the cyanide complexes of iron. Its formation can be used as a simple wet chemistry test to distinguish between aqueous solutions of Fe2+ and Fe3+ as they react (respectively) with "potassium ferricyanide and "potassium ferrocyanide to form Prussian blue.
Iron(III) complexes are quite similar to those of "chromium(III) with the exception of iron(III)'s preference for O-donor instead of N-donor ligands. The latter tend to be rather more unstable than iron(II) complexes and often dissociate in water. Many Fe–O complexes show intense colors and are used as tests for "phenols or "enols. For example, in the "ferric chloride test, used to determine the presence of phenols, "iron(III) chloride reacts with a phenol to form a deep violet complex:
Among the halide and pseudohalide complexes, fluoro complexes of iron(III) are the most stable, with the colorless [FeF5(H2O)]2− being the most stable in aqueous solution. Chloro complexes are less stable and favor tetrahedral coordination as in [FeCl4]−; finally, [FeBr4]− and [FeI4]− reduce themselves easily to iron(II). "Thiocyanate is a common test for the presence of iron(III) as it forms the blood-red [Fe(SCN)(H2O)5]2+. Like manganese(II), most iron(III) complexes are high-spin, the exceptions being those with ligands that are high in the "spectrochemical series such as "cyanide. An example of a low-spin iron(III) complex is [Fe(CN)6]3−. The cyanide ligands may easily be detached in [Fe(CN)6]3−, and hence this complex is poisonous, unlike the iron(II) complex [Fe(CN)6]4− found in Prussian blue, which does not release "hydrogen cyanide except when dilute acids are added. Iron shows a great variety of electronic "spin states, including every possible spin quantum number value for a d-block element from 0 (diamagnetic) to 5⁄2 (5 unpaired electrons). This value is always half the number of unpaired electrons. Complexes with zero to two unpaired electrons are considered low-spin and those with four or five are considered high-spin.
Iron(II) complexes are less stable than iron(III) complexes but the preference for O-donor ligands is less marked, so that for example [Fe(NH3)6]2+ is known while [Fe(NH3)6]3+ is not. They have a tendency to be oxidized to iron(III) but this can be moderated by low pH and the specific ligands used.
Cyanide complexes are technically "organometallic but more important are "carbonyl complexes and "sandwich and "half-sandwich compounds. The premier iron(0) compound is "iron pentacarbonyl, Fe(CO)5, which is used to produce "carbonyl iron powder, a highly reactive form of metallic iron. Thermolysis of iron pentacarbonyl gives the trinuclear cluster, "triiron dodecacarbonyl. Collman's reagent, "disodium tetracarbonylferrate, is a useful reagent for organic chemistry; it contains iron in the −2 oxidation state. "Cyclopentadienyliron dicarbonyl dimer contains iron in the rare +1 oxidation state.
"Ferrocene was an extremely important compound in the early history of the branch of "organometallic chemistry, and to this day iron is still one of the most important metals in this field. It was first synthesised in 1951 during an attempt to prepare the "fulvalene (C10H8) by oxidative dimerization of "cyclopentadiene; the resultant product was found to have "molecular formula C10H10Fe and reported to exhibit "remarkable stability". The discovery sparked substantial interest in the field of organometallic chemistry, in part because the structure proposed by Pauson and Kealy (shown at right) was inconsistent with then-existing bonding models and did not explain its unexpected stability. Consequently, the initial challenge was to definitively determine the structure of ferrocene in the hope that its bonding and properties would then be understood. The shockingly novel sandwich structure, [Fe(η5-C5H5)2], was deduced and reported independently by three groups in 1952: "Robert Burns Woodward and "Geoffrey Wilkinson investigated the reactivity in order to determine the structure and demonstrated that ferrocene undergoes similar reactions to a typical aromatic molecule (such as "benzene), "Ernst Otto Fischer deduced the sandwich structure and also began synthesising other "metallocenes including "cobaltocene; Eiland and Pepinsky provided "X-ray crystallographic confirmation of the sandwich structure.
Applying "valence bond theory to ferrocene by considering an Fe2+ centre and two cyclopentadienide anions (C5H5−), which are known to be "aromatic according to "Hückel's rule and hence highly stable, allowed correct prediction of the geometry of the molecule. Once "molecular orbital theory was successfully applied and the "Dewar-Chatt-Duncanson model proposed, the reasons for ferrocene's remarkable stability became clear. Ferrocene was not the first organometallic compound known – "Zeise's salt, K[PtCl3(C2H4)]·H2O was reported in 1831 and "Mond's discovery of Ni(CO)4 occurred in 1888, but it was ferrocene's discovery that began "organometallic chemistry as a separate area of chemistry. It was so important that Wilkinson and Fischer shared the 1973 "Nobel Prize for Chemistry "for their pioneering work, performed independently, on the chemistry of the organometallic, so called "sandwich compounds". Ferrocene itself can be used as the backbone of a ligand, e.g. "1,1'-bis(diphenylphosphino)ferrocene (dppf). Ferrocene can itself be oxidized to the "ferrocenium cation (Fc+); the ferrocene/ferrocenium couple is often used as a reference in electrochemistry.
"Metallocenes like ferrocene can be prepared by reaction of "freshly-cracked cyclopentadiene with "iron(II) chloride and a weak base. It is an "aromatic substance and undergoes "substitution reactions rather than "addition reactions on the cyclopentadienyl ligands. For example, "Friedel-Crafts acylation of ferrocene with "acetic anhydride yields "acetylferrocene just as acylation of benzene yields "acetophenone under similar conditions.
As iron has been in use for such a long time, it has many different names in different languages. The source of its chemical symbol Fe is the Latin word ferrum, and its descendants are the names of the element in the "Romance languages (for example, "French fer, "Spanish hierro, and "Italian and "Portuguese ferro). The word ferrum itself possibly comes from the "Semitic languages, via "Etruscan, from a root that also gave rise to "Old English bræs ""brass". The English word iron derives ultimately from "Proto-Germanic *isarnan, which is also the source of the German name Eisen. It was most likely borrowed from "Celtic *isarnon, which ultimately comes from "Proto-Indo-European *is-(e)ro- "powerful, holy" and finally *eis "strong", referencing iron's strength as a metal. Kluge relates *isarnon to Illyric and Latin "ira, 'wrath') The "Balto-Slavic names for iron (for example, "Russian железо [zhelezo]) are the only ones to come directly from the Proto-Indo-European *ghelgh- "iron". In many of these languages, the word for iron may also be used to denote other objects made of iron or steel, or figuratively because of the hardness and strength of the metal. The "Chinese tiě ("traditional 鐵; "simplified 铁) derives from "Proto-Sino-Tibetan *hliek, and was borrowed into "Japanese as 鉄 tetsu, which also has the native reading kurogane "black metal" (similar to how iron is referenced in the English word "blacksmith).
Iron belongs to the elements undoubtedly known to the ancient world. It has been worked, or "wrought, for millennia. However, iron objects of great age are much rarer than objects made of gold or silver due to the ease with which iron corrodes.
Beads made from "meteoric iron in 3500 BC or earlier were found in Gerzah, Egypt by G. A. Wainwright. The beads contain 7.5% nickel, which is a signature of meteoric origin since iron found in the Earth's crust generally has only minuscule nickel impurities. Meteoric iron was highly regarded due to its origin in the heavens and was often used to forge weapons and tools. For example, a "dagger made of meteoric iron was found in the tomb of "Tutankhamun, containing similar proportions of iron, cobalt, and nickel to a meteorite discovered in the area, deposited by an ancient meteor shower. Items that were likely made of iron by Egyptians date from 3000 to 2500 BC. Meteoritic iron is comparably soft and ductile and easily forged by "cold working but may get brittle when heated because of the "nickel content.
The first iron production started in the "Middle Bronze Age but it took several centuries before iron displaced bronze. Samples of "smelted iron from "Asmar, Mesopotamia and Tall Chagar Bazaar in northern Syria were made sometime between 3000 and 2700 BC. The "Hittites established an empire in north-central "Anatolia around 1600 BC. They appear to be the first to understand the production of iron from its ores and regard it highly in their society. The "Hittites began to smelt iron between 1500 and 1200 BC and the practice spread to the rest of the Near East after their empire fell in 1180 BC. The subsequent period is called the "Iron Age.
Artifacts of smelted iron are found in "India dating from 1800 to 1200 BC, and in the "Levant from about 1500 BC (suggesting smelting in "Anatolia or the "Caucasus). Alleged references (compare "history of metallurgy in South Asia) to iron in the Indian "Vedas have been used for claims of a very early usage of iron in India respectively to date the texts as such. The "rigveda term ayas (metal) probably refers to copper and bronze, while iron or śyāma ayas, literally "black metal", first is mentioned in the post-rigvedic "Atharvaveda.
There is some archaeological evidence of iron being smelted in "Zimbabwe and southeast Africa as early as the eighth century BC. Iron working was introduced to "Greece in the late 11th century BC, from which it spread quickly throughout Europe.
The spread of ironworking in Central and Western Europe is associated with "Celtic expansion. According to "Pliny the Elder, iron use was common in the "Roman era. The annual iron output of the "Roman Empire is estimated at 84750 "t, while the similarly populous and contemporary Han China produced around 5000 t. In China, iron only appears circa 700–500 BC. Iron smelting may have been introduced into China through Central Asia. The earliest evidence of the use of a "blast furnace in China dates to the 1st century AD, and cupola furnaces were used as early as the "Warring States period (403–221 BC). Usage of the blast and cupola furnace remained widespread during the "Song and "Tang Dynasties.
During the Industrial Revolution in Britain, "Henry Cort began refining iron from "pig iron to "wrought iron (or bar iron) using innovative production systems. In 1783 he patented the "puddling process for refining iron ore. It was later improved by others, including "Joseph Hall.
"Cast iron was first produced in "China during 5th century BC, but was hardly in Europe until the medieval period. The earliest "cast iron artifacts were discovered by archaeologists in what is now modern "Luhe County, "Jiangsu in China. Cast iron was used in "ancient China for warfare, agriculture, and architecture. During the "medieval period, means were found in Europe of producing wrought iron from cast iron (in this context known as "pig iron) using "finery forges. For all these processes, "charcoal was required as fuel.
Medieval "blast furnaces were about 10 feet (3.0 m) tall and made of fireproof brick; forced air was usually provided by hand-operated bellows. Modern blast furnaces have grown much bigger, with hearths fourteen meters in diameter that allow them to produce thousands of tons of iron each day, but essentially operate in much the same way as they did during medieval times.
In 1709, "Abraham Darby I established a "coke-fired blast furnace to produce cast iron, replacing charcoal, although continuing to use blast furnaces. The ensuing availability of inexpensive iron was one of the factors leading to the "Industrial Revolution. Toward the end of the 18th century, cast iron began to replace wrought iron for certain purposes, because it was cheaper. Carbon content in iron was not implicated as the reason for the differences in properties of wrought iron, cast iron, and steel until the 18th century.
Since iron was becoming cheaper and more plentiful, it also became a major structural material following the building of the innovative "first iron bridge in 1778. This bridge still stands today as a monument to the role iron played in the Industrial Revolution. Following this, iron was used in rails, boats, ships, aqueducts, and buildings, as well as in iron cylinders in "steam engines. Railways have been central to the formation of modernity and ideas of progress and various languages (e.g. French, Spanish, Italien and German) refer to railways as iron road.
Steel (with smaller carbon content than pig iron but more than wrought iron) was first produced in antiquity by using a "bloomery. Blacksmiths in "Luristan in western Persia were making good steel by 1000 BC. Then improved versions, "Wootz steel by India and "Damascus steel were developed around 300 BC and AD 500 respectively. These methods were specialized, and so steel did not become a major commodity until the 1850s.
New methods of producing it by "carburizing bars of iron in the "cementation process were devised in the 17th century. In the "Industrial Revolution, new methods of producing bar iron without charcoal were devised and these were later applied to produce steel. In the late 1850s, "Henry Bessemer invented a new steelmaking process, involving blowing air through molten pig iron, to produce mild steel. This made steel much more economical, thereby leading to wrought iron no longer being produced in large quantities.
In 1774, "Antoine Lavoisier used the reaction of water steam with metallic iron inside an incandescent iron tube to produce "hydrogen in his experiments leading to the demonstration of the "conservation of mass, which was instrumental in changing chemistry from a qualitative science to a quantitative one.
Iron plays a certain role in mythology and has found various usage "as a metaphor and in "folklore. The "Greek poet "Hesiod's "Works and Days (lines 109–201) lists different "ages of man named after metals like gold, silver, bronze and iron to account for successive ages of humanity. The iron age was closely related with Rome, and in Ovid's Metamorphoses
The Virtues, in despair, quit the earth; and the depravity of man becomes universal and complete. Hard steel succeeded then.— Ovid, "Metamorphoses, Book I, Iron age, line 160 ff
An example of the importance of iron's symbolic role may be found in the "German Campaign of 1813. "Frederick William III commissioned then the first "Iron Cross as military decoration. "Berlin iron jewellery reached its peak production between 1813 and 1815, when the Prussian "royal family urged citizens to donate gold and silver jewellery for military funding. The inscription Gold gab ich für Eisen (I gave gold for iron) was used as well in later war efforts.
The production of iron or steel is a process consisting of two main stages. In the first stage pig iron is produced in a blast furnace. Alternatively, it may be directly reduced. In the second stage, pig iron is converted to wrought iron, steel, or cast iron.
For a few limited purposes when it is needed, pure iron is produced in the laboratory in small quantities by reducing the pure oxide or hydroxide with hydrogen, or forming iron pentacarbonyl and heating it to 250 °C so that it decomposes to form pure iron powder. Another method is electrolysis of ferrous chloride onto an iron cathode.
Industrial iron production starts with iron ores, principally "hematite, which has a nominal formula Fe2O3, and "magnetite, with the formula Fe3O4. These ores are reduced to the metal in a "carbothermic reaction, i.e. by treatment with carbon. The conversion is typically conducted in a blast furnace at temperatures of about 2000 °C. Carbon is provided in the form of coke. The process also contains a "flux such as "limestone, which is used to remove silicaceous minerals in the ore, which would otherwise clog the furnace. The coke and limestone are fed into the top of the furnace, while a massive blast of "air heated to 900 °C, about 4 tons per ton of iron, is forced into the furnace at the bottom.
Some iron in the high-temperature lower region of the furnace reacts directly with the coke:
The flux present to melt impurities in the ore is principally "limestone ("calcium carbonate) and "dolomite (calcium-magnesium carbonate). Other specialized fluxes are used depending on the details of the ore. In the heat of the furnace the limestone flux decomposes to "calcium oxide (also known as quicklime):
The slag melts in the heat of the furnace. In the bottom of the furnace, the molten slag floats on top of the denser molten iron, and apertures in the side of the furnace are opened to run off the iron and the slag separately. The iron, once cooled, is called pig iron, while the slag can be used as a material in "road construction or to improve mineral-poor soils for "agriculture.
Owing to environmental concerns, alternative methods of processing iron have been developed. ""Direct iron reduction" "reduces iron ore to a ferrous lump called ""sponge" iron or "direct" iron that is suitable for steelmaking. Two main reactions comprise the direct reduction process:
Natural gas is partially oxidized (with heat and a catalyst):
These gases are then treated with iron ore in a furnace, producing solid sponge iron:
Iron is a byproduct of burning a mixture of aluminum powder and rust powder.
Pig iron is not pure iron, but has 4–5% carbon dissolved in it with small amounts of other impurities like sulfur, magnesium, phosphorus and manganese. As the carbon is the major impurity, the iron (pig iron) becomes brittle and hard. Removing the other impurities results in cast iron, which is used to cast articles in "foundries such as stoves, pipes, radiators, lamp-posts and rails.
Alternatively pig iron may be made into steel (with up to about 2% carbon) or wrought iron (commercially pure iron). Various processes have been used for this, including "finery forges, "puddling furnaces, "Bessemer converters, "open hearth furnaces, "basic oxygen furnaces, and "electric arc furnaces. In all cases, the objective is to oxidize some or all of the carbon, together with other impurities. On the other hand, other metals may be added to make alloy steels.
Iron is the most widely used of all the metals, accounting for over 90% of worldwide metal production. Its low cost and high strength make it indispensable in engineering applications such as the construction of machinery and "machine tools, "automobiles, the "hulls of large "ships, and structural components for buildings. Since pure iron is quite soft, it is most commonly combined with alloying elements to make steel.
Ferrite (α-iron) is a fairly soft metal that can dissolve only a small concentration of carbon (no more than 0.021% by mass at 910 °C). "Austenite (γ-iron) is similarly soft and metallic but can dissolve considerably more carbon (as much as 2.04% by mass at 1146 °C). This form of iron is used in the type of "stainless steel used for making cutlery, and hospital and food-service equipment.
Commercially available iron is classified based on purity and the abundance of additives. "Pig iron has 3.5–4.5% carbon and contains varying amounts of contaminants such as "sulfur, silicon and "phosphorus. Pig iron is not a saleable product, but rather an intermediate step in the production of cast iron and steel. The reduction of contaminants in pig iron that negatively affect material properties, such as sulfur and phosphorus, yields cast iron containing 2–4% carbon, 1–6% silicon, and small amounts of "manganese. Pig iron has a "melting point in the range of 1420–1470 K, which is lower than either of its two main components, and makes it the first product to be melted when carbon and iron are heated together. Its mechanical properties vary greatly and depend on the form the carbon takes in the alloy.
"White" cast irons contain their carbon in the form of "cementite, or iron carbide (Fe3C). This hard, brittle compound dominates the mechanical properties of white cast irons, rendering them hard, but unresistant to shock. The broken surface of a white cast iron is full of fine facets of the broken iron-carbide, a very pale, silvery, shiny material, hence the appellation. Cooling a mixture of iron with 0.8% carbon slowly below 723 °C to room temperature results in separate, alternating layers of cementite and ferrite, which is soft and malleable and is called "pearlite for its appearance. Rapid cooling, on the other hand, does not allow time for this separation and creates hard and brittle "martensite. The steel can then be tempered by reheating to a temperature in between, changing the proportions of pearlite and martensite. The end product below 0.8% carbon content is a pearlite-ferrite mixture, and that above 0.8% carbon content is a pearlite-cementite mixture.
In "gray iron the carbon exists as separate, fine flakes of "graphite, and also renders the material brittle due to the sharp edged flakes of graphite that produce "stress concentration sites within the material. A newer variant of gray iron, referred to as "ductile iron is specially treated with trace amounts of "magnesium to alter the shape of graphite to spheroids, or nodules, reducing the stress concentrations and vastly increasing the toughness and strength of the material.
"Wrought iron contains less than 0.25% carbon but large amounts of slag that give it a fibrous characteristic. It is a tough, malleable product, but not as fusible as pig iron. If honed to an edge, it loses it quickly. Wrought iron is characterized by the presence of fine fibers of "slag entrapped within the metal. Wrought iron is more corrosion resistant than steel. It has been almost completely replaced by "mild steel for traditional "wrought iron" products and "blacksmithing.
|Country||"Iron ore||"Pig iron||"Direct iron||"Steel|
Mild steel corrodes more readily than wrought iron, but is cheaper and more widely available. "Carbon steel contains 2.0% carbon or less, with small amounts of "manganese, "sulfur, "phosphorus, and silicon. "Alloy steels contain varying amounts of carbon as well as other metals, such as "chromium, "vanadium, "molybdenum, nickel, "tungsten, etc. Their alloy content raises their cost, and so they are usually only employed for specialist uses. One common alloy steel, though, is "stainless steel. Recent developments in ferrous metallurgy have produced a growing range of microalloyed steels, also termed '"HSLA' or high-strength, low alloy steels, containing tiny additions to produce high strengths and often spectacular toughness at minimal cost.
Apart from traditional applications, iron is also used for protection from ionizing radiation. Although it is lighter than another traditional protection material, "lead, it is much stronger mechanically. The attenuation of radiation as a function of energy is shown in the graph.
The main disadvantage of iron and steel is that pure iron, and most of its alloys, suffer badly from "rust if not protected in some way, a cost amounting to over 1% of the world's economy. "Painting, "galvanization, "passivation, plastic coating and "bluing are all used to protect iron from rust by excluding "water and oxygen or by "cathodic protection. The mechanism of the rusting of iron is as follows:
Although the dominant use of iron is in metallurgy, iron compounds are also pervasive in industry. Iron catalysts are traditionally used in the "Haber-Bosch process for the production of ammonia and the "Fischer-Tropsch process for conversion of carbon monoxide to "hydrocarbons for fuels and lubricants. Powdered iron in an acidic solvent was used in the "Bechamp reduction the reduction of "nitrobenzene to "aniline.
"Iron(III) chloride finds use in water purification and "sewage treatment, in the dyeing of cloth, as a coloring agent in paints, as an additive in animal feed, and as an "etchant for "copper in the manufacture of "printed circuit boards. It can also be dissolved in alcohol to form tincture of iron, which is used as a medicine to stop bleeding in "canaries.
"Iron(II) sulfate is used as a precursor to other iron compounds. It is also used to "reduce chromate in cement. It is used to fortify foods and treat "iron deficiency anemia. "Iron(III) sulfate is used in settling minute sewage particles in tank water. "Iron(II) chloride is used as a reducing flocculating agent, in the formation of iron complexes and magnetic iron oxides, and as a reducing agent in organic synthesis.
Iron is involved in numerous biological processes. It is the most important transition metal in all living organisms. Iron-proteins are found in all living organisms: "archaeans, "bacteria and "eukaryotes, including humans. For example, the color of blood is due to hemoglobin, an iron-containing protein. As illustrated by hemoglobin, iron is often bound to "cofactors, such as "hemes, which are non-protein compounds, often involving metal ions, that are required for a protein's biological activity to happen. The "iron-sulfur clusters are pervasive and include "nitrogenase, the enzymes responsible for biological "nitrogen fixation. The main roles of iron-containing proteins are the transport and storage of oxygen, as well as the transfer of electrons.
Iron is a necessary "trace element found in nearly all living organisms. Iron-containing enzymes and proteins, often containing "heme "prosthetic groups, participate in many biological oxidations and in transport. Examples of proteins found in higher organisms include hemoglobin, "cytochrome (see "high-valent iron), and "catalase. The average adult human contains about 0.005% body weight of iron, or about four grams, of which three quarters is in hemoglobin – a level that remains constant despite only about one milligram of iron being absorbed each day, because the human body recycles its hemoglobin for the iron content.
Iron acquisition poses a problem for aerobic organisms because ferric iron is poorly soluble near neutral pH. Thus, these organisms have developed means to absorb iron as complexes, sometimes taking up ferrous iron before oxidising it back to ferric iron. In particular, bacteria have evolved very high-affinity sequestering agents called "siderophores.
After uptake in human "cells, iron storage is carefully regulated; iron ions are never "free". This is because free iron ions have a high potential for biological toxicity. A major component of this regulation is the protein "transferrin, which binds iron ions absorbed from the "duodenum and carries it in the "blood to cells. Transferrin contains Fe3+ in the middle of a distorted octahedron, bonded to one nitrogen, three oxygens and a chelating "carbonate anion that traps the Fe3+ ion: it has such a high "stability constant that it is very effective at taking up Fe3+ ions even from the most stable complexes. At the bone marrow, transferrin is reduced from Fe3+ and Fe2+ and stored as "ferritin to be incorporated into hemoglobin.
The most commonly known and studied "bioinorganic iron compounds (biological iron molecules) are the "heme proteins: examples are "hemoglobin, "myoglobin, and "cytochrome P450. These compounds participate in transporting gases, building "enzymes, and transferring "electrons. "Metalloproteins are a group of proteins with metal ion "cofactors. Some examples of iron metalloproteins are "ferritin and "rubredoxin. Many enzymes vital to life contain iron, such as "catalase, "lipoxygenases, and "IRE-BP.
Hemoglobin is an oxygen carrier that occurs in "red blood cells and contributes their color, transporting oxygen in the arteries from the lungs to the muscles where it is transferred to "myoglobin, which stores it until it is needed for the metabolic oxidation of "glucose, which generates energy. Here the hemoglobin binds to "carbon dioxide, produced when glucose is oxidized, which is transported through the veins by hemoglobin (predominantly as "bicarbonate anions) back to the lungs where it is exhaled. In hemoglobin, the iron is in one of four "heme groups and has six possible coordination sites; four are occupied by nitrogen atoms in a "porphyrin ring, the fifth by an "imidazole nitrogen in a "histidine residue of one of the protein chains attached to the heme group, and the sixth is reserved for the oxygen molecule it can reversibly bind to. When hemoglobin is not attached to oxygen (and is then called deoxyhemoglobin), the Fe2+ ion at the center of the "heme group (in the hydrophobic protein interior) is in a high-spin configuration. It is thus too large to fit inside the porphyrin ring, which bends instead into a dome with the Fe2+ ion about 55 picometers above it. In this configuration, the sixth coordination site reserved for the oxygen is blocked by another histidine residue.
When deoxyhemoglobin picks up an oxygen molecule, this histidine residue moves away and returns once the oxygen is securely attached to form a "hydrogen bond with it. This results in the Fe2+ ion switching to a low-spin configuration, resulting in a 20% decrease in ionic radius so that now it can fit into the porphyrin ring, which becomes planar. (Additionally, this hydrogen bonding results in the tilting of the oxygen molecule, resulting in a Fe–O–O bond angle of around 120° that avoids the formation of Fe–O–Fe or Fe–O2–Fe bridges that would lead to electron transfer, the oxidation of Fe2+ to Fe3+, and the destruction of hemoglobin.) This results in a movement of all the protein chains that leads to the other subunits of hemoglobin changing shape to a form with larger oxygen affinity. Thus, when deoxyhemoglobin takes up oxygen, its affinity for more oxygen increases, and vice versa. Myoglobin, on the other hand, contains only one heme group and hence this cooperative effect cannot occur. Thus, while hemoglobin is almost saturated with oxygen in the high partial pressures of oxygen found in the lungs, its affinity for oxygen is much lower than myoglobin in the low partial pressures of oxygen found in muscle tissue, resulting in oxygen transfer. This is further enhanced by the concomitant "Bohr effect (named after "Christian Bohr, the father of "Niels Bohr), in which lowered pH (as occurs when carbon dioxide is released in the muscles) further lowers the oxygen affinity of hemoglobin.
"Carbon monoxide and "phosphorus trifluoride are poisonous to humans because they bind to hemoglobin similarly to oxygen, but with much more strength, so that oxygen can no longer be transported throughout the body. Hemoglobin bound to carbon monoxide is known as "carboxyhemoglobin. This effect also plays a minor role in the toxicity of "cyanide, but there the major effect is by far its interference with the proper functioning of the electron transport protein cytochrome a. The cytochrome proteins also involve heme groups and are involved in the metabolic oxidation of glucose by oxygen. The sixth coordination site is then occupied by either another imidazole nitrogen or a "methionine sulfur, so that these proteins are largely inert to oxygen – with the exception of cytochrome a, which bonds directly to oxygen and thus is very easily poisoned by cyanide. Here, the electron transfer takes place as the iron remains in low spin but changes between the +2 and +3 oxidation states. Since the reduction potential of each step is slightly greater than the previous one, the energy is released step-by-step and can thus be stored in "adenosine triphosphate. Cytochrome a is slightly distinct, as it occurs at the mitochondrial membrane, binds directly to oxygen, and transports protons as well as electrons, as follows:
Although the heme proteins are the most important class of iron-containing proteins, the "iron-sulfur proteins are also very important, being involved in electron transfer, which is possible since iron can exist stably in either the +2 or +3 oxidation states. These have one, two, four, or eight iron atoms that are each approximately tetrahedrally coordinated to four sulfur atoms; because of this tetrahedral coordination, they always have high-spin iron. The simplest of such compounds is "rubredoxin, which has only one iron atom coordinated to four sulfur atoms from "cysteine residues in the surrounding peptide chains. Another important class of iron-sulfur proteins is the "ferredoxins, which have multiple iron atoms. Transferrin does not belong to either of these classes.
The ability of sea "mussels to maintain their grip on rocks in the ocean is facilitated by their use of "organometallic iron-based bonds in their protein-rich "cuticles. Based on synthetic replicas, the presence of iron in these structures increased "elastic modulus 770 times, "tensile strength 58 times, and "toughness 92 times. The amount of stress required to permanently damage them increased 76 times.
Iron is pervasive, but particularly rich sources of dietary iron include "red meat, "lentils, "beans, "poultry, "fish, "leaf vegetables, "watercress, "tofu, "chickpeas, "black-eyed peas, and "blackstrap molasses. "Bread and "breakfast cereals are sometimes specifically fortified with iron. Iron in low amounts is found in "molasses, "teff, and "farina.
Iron provided by "dietary supplements is often found as "iron(II) fumarate, although "iron(II) sulfate is cheaper and is absorbed equally well. Elemental iron, or reduced iron, despite being absorbed at only one-third to two-thirds the efficiency (relative to iron sulfate), is often added to foods such as breakfast cereals or enriched wheat flour. Iron is most available to the body when "chelated to amino acids and is also available for use as a common "iron supplement. "Glycine, the cheapest and most common amino acid is most often used to produce iron glycinate supplements.
The U.S. Institute of Medicine (IOM) updated Estimated Average Requirements (EARs) and Recommended Dietary Allowances (RDAs) for iron in 2001. The current EAR for iron for women ages 14–18 is 7.9 mg/day, 8.1 for ages 19–50 and 5.0 thereafter (post menopause). For men the EAR is 6.0 mg/day for ages 19 and up. The RDA is 15.0 mg/day for women ages 15–18, 18.0 for 19–50 and 8.0 thereafter. For men, 8.0 mg/day for ages 19 and up. RDAs are higher than EARs so as to identify amounts that will cover people with higher than average requirements. RDA for pregnancy is 27 mg/day. RDA for lactation is 9 mg/day. For children ages 1–3 years 7 mg/day, 10 for ages 4–8 and 8 for ages 9–13. As for safety, the IOM also sets "Tolerable upper intake levels (ULs) for vitamins and minerals when evidence is sufficient. In the case of iron the UL is set at 45 mg/day. Collectively the EARs, RDAs and ULs are referred to as "Dietary Reference Intakes.
The "European Food Safety Authority (EFSA) refers to the collective set of information as Dietary Reference Values, with Population Reference Intake (PRI) instead of RDA, and Average Requirement instead of EAR. AI and UL defined the same as in United States. For women the PRI is 13 mg/day ages 15–17 years, 16 mg/day for women ages 18 and up who are premenopausal and 11 mg/day postmenopausal. For pregnancy and lactation, 16 mg/day. For men the PRI is 11 mg/day ages 15 and older. For children ages 1 to 14 the PRI increases from 7 to 11 mg/day. The PRIs are higher than the U.S. RDAs, with the exception of pregnancy. The EFSA reviewed the same safety question did not establish a UL.
For U.S. food and dietary supplement labeling purposes the amount in a serving is expressed as a percent of Daily Value (%DV). For iron labeling purposes 100% of the Daily Value was 18 mg, and as of May 27, 2016 remained unchanged at 18 mg. A table of all of the old and new adult Daily Values is provided at "Reference Daily Intake. The original deadline to be in compliance was July 28, 2018, but on September 29, 2017 the U.S. "Food and Drug Administration released a proposed rule that extended the deadline to January 1, 2020 for large companies and January 1, 2021 for small companies.
Mild iron deficiency can be prevented or corrected by eating iron-rich foods and by cooking in an iron skillet. Because iron is a requirement for most plants and animals, a wide range of foods provide iron. Good sources of dietary iron have "heme-iron, as this is most easily absorbed and is not inhibited by medication or other dietary components. Three examples are "red meat, "poultry, and "insects. Non-heme sources do contain iron, though it has reduced bioavailability. Examples are "lentils, "beans, "leafy vegetables, "pistachios, "tofu, fortified bread, and fortified breakfast cereals.
|Fire diamond hazard sign for metallic iron|
"Iron uptake is tightly regulated by the human body, which has no regulated physiological means of excreting iron. Only small amounts of iron are lost daily due to mucosal and skin epithelial cell sloughing, so control of iron levels is primarily accomplished by regulating uptake. Regulation of iron uptake is impaired in some people as a result of a "genetic defect that maps to the HLA-H gene region on "chromosome 6 and leads to abnormally low levels of "hepcidin, a key regulator of the entry of iron into the circulatory system in mammals. In these people, excessive iron intake can result in "iron overload disorders, known medically as "hemochromatosis. Many people have an undiagnosed genetic susceptibility to iron overload, and are not aware of a family history of the problem. For this reason, people should not take iron supplements unless they suffer from "iron deficiency and have consulted a doctor. Hemochromatosis is estimated to be the cause of 0.3 to 0.8% of all metabolic diseases of Caucasians.
Overdoses of ingested iron can cause excessive levels of free iron in the blood. High blood levels of free ferrous iron react with "peroxides to produce highly reactive "free radicals that can damage "DNA, "proteins, "lipids, and other cellular components. Iron toxicity occurs when the cell contains free iron, which generally occurs when iron levels exceed the availability of "transferrin to bind the iron. Damage to the cells of the "gastrointestinal tract can also prevent them from regulating iron absorption, leading to further increases in blood levels. Iron typically damages cells in the "heart, "liver and elsewhere, causing adverse effects that include "coma, "metabolic acidosis, "shock, "liver failure, "coagulopathy, "adult respiratory distress syndrome, long-term organ damage, and even death. Humans experience iron toxicity when the iron exceeds 20 milligrams for every kilogram of body mass; 60 milligrams per kilogram is considered a "lethal dose. Overconsumption of iron, often the result of children eating large quantities of "ferrous sulfate tablets intended for adult consumption, is one of the most common toxicological causes of death in children under six. The "Dietary Reference Intake (DRI) sets the Tolerable Upper Intake Level (UL) for adults at 45 mg/day. For children under fourteen years old the UL is 40 mg/day.
Iron deficiency is the most common "nutritional deficiency in the world. When loss of iron is not adequately compensated by adequate dietary iron intake, a state of "latent iron deficiency occurs, which over time leads to "iron-deficiency anemia if left untreated, which is characterised by an insufficient number of red blood cells and an insufficient amount of hemoglobin. Children, "pre-menopausal women (women of child-bearing age), and people with poor diet are most susceptible to the disease. Most cases of iron-deficiency anemia are mild, but if not treated can cause problems like fast or irregular heartbeat, complications during pregnancy, and delayed growth in infants and children.
... the blade's composition of iron, nickel and cobalt was an approximate match for a meteorite that landed in northern Egypt. The result "strongly suggests an extraterrestrial origin"
earlist blast furnace discovered in China from about the first century AD
|Look up iron in Wiktionary, the free dictionary.|
|Wikimedia Commons has media related to Iron.|
|"Wikisource has the text of the 1905 "New International Encyclopedia article Iron.|