See more Leather crafting articles on AOD.

Powered by
Share this page on
Article provided by Wikipedia

( => ( => ( => Leather crafting [pageid] => 9587064 ) =>
Modern leather-working tools

Leather crafting or simply leathercraft is the practice of making "leather into craft objects or works of art, using shaping techniques, coloring techniques or both.




A dyed leather "carving

Leather(loise kaibigan mo to) وةذقʾints of a tooled piece and so pooling in the background areas give nice contrasts. Leaving parts unstained also provides a type of contrast.

Alternatives to spirit stains might include a number of options. "Shoe polish can be used to dye and preserve leather. Oils such as "neatsfoot or "linseed can be applied to preserve leather but darkens them. A wax paste more often than not serves as the final coat.

Sweat and grime will also stain and 'antique' leather over time. Gun holsters, saddlebags, wallets and canteens used by cowboys and buckaroos were rarely colored in the "Old West. The red, brown, and black tones develop naturally through handling and as the oiled leathers absorb the rays of the desert sun.

Due to changing environmental laws, alcohol-based dyes are soon to be unavailable.["when?]["where?] There are currently water-based alternatives available, although they tend not to work as well.


Leather painting differs from leather dyeing in that "paint remains only on the surface while dyes are absorbed into the leather. Due to this difference, leather painting techniques are generally not used on items that can or must bend nor on items that receive friction, such as belts and wallets because under these conditions, the paint is likely to crack and flake off. However, latex paints can be used to paint such flexible leather items. In the main though, a flat piece of leather, backed with a stiff board is ideal and common, though three-dimensional forms are possible so long as the painted surface remains secured.

"Acrylic paint is a common medium, often painted on tooled leather pictures, backed with wood or cardboard, and then framed. Unlike photographs, leather paintings are displayed without a glass cover, to prevent "mold.


Leather carving entails using metal implements to compress moistened "leather in such a way as to give a three-dimensional appearance to a two-dimensional surface. The surface of the leather is not intended to be cut through, as would be done in "filigree.

The main tools used to "carve" leather include: "swivel knife, veiner, beveler, pear shader, "seeder, cam, and background tool. The swivel knife is held similar to pencil and drawn along the leather to outline patterns. The other tools are "punch-type implements struck with a wooden, nylon or "rawhide "mallet. The object is to add further definition with them to the cut lines made by the swivel knife.

In the United States and Mexico, the western floral style, known as "Sheridan Style", of carving leather predominates. Usually, these are stylized pictures of acanthis or roses. California, Texas, and a few other styles are common. By far the most preeminent carver in the United States was "Al Stohlman. His patterns and methods have been embraced by many hobbyists, scout troops, reenacters, and craftsmen.


Examples of geometric stamping on leather.

Leather stamping involves the use of shaped implements (stamps) to create an imprint onto a "leather surface, often by striking the stamps with a "mallet.

Commercial stamps are available in various designs, typically geometric or representative of animals. Most stamping is performed on vegetable tanned leather that has been dampened with water, as the water makes the leather softer and able to be compressed by the design being pressed or stamped into it using a press. After the leather has been stamped, the design stays on the leather as it dries out, but it can fade if the leather becomes wet and is flexed. To make the impressions last longer, the leather is conditioned with "oils and "fats to make it waterproof and prevent the fibers from deforming.


Leather shaping or molding consists of soaking a piece of leather in hot or room temperature water to greatly increase pliability and then shaping it by hand or with the use of objects or even molds as forms. As the leather dries it stiffens and holds its shape. Carving and stamping may be done prior to molding. Dying however must take place after molding, as the water soak will remove much of the color. Molding has become popular among hobbyists whose crafts are related to fantasy, goth/steampunk culture and cosplay.

Two well known pieces of molded leather are part of the funerary achievements of "Edward, the Black Prince, the heraldic crest and shield. [1]

Laser cutting/etching[edit]

"Carbon dioxide lasers cut through leather very smoothly, and at low power a "laser cutter can etch detailed designs into leather to any desired depth.


Perforation (Latin perforo-... knocking) – the result of punching that is provided for the manufacture of a large number of regularly arranged apertures of regular shape in the sheet and other material. A decorative technique that is used to connect two sheets of leather or to decorate them.


Leather Portrait

Pyrography (purogravure) on leather is the art with using a hot needle to make a drawing on leather. Under the influence of heat the leather gets darker shades which subsequently become a complete picture. One of the best ways to transfer complex patterns such as portraits.[2]


  1. ^ Description and photographs of the original and the reproduction from the tomb in Canterbury Cathedral
  2. ^ "Leather Portrait". Leatherport. 
) )