See more PDF417 articles on AOD.

Powered by
Share this page on
Article provided by Wikipedia

( => ( => ( => PDF417 [pageid] => 599590 ) =>
""Sample of a PDF417 symbol

PDF417 is a stacked linear "barcode symbol format used in a variety of applications, primarily transport, identification cards, and inventory management. PDF stands for Portable Data File. The 417 signifies that each pattern in the code consists of 4 bars and spaces, and that each pattern is 17 units long. The PDF417 symbology was invented by Dr. Ynjiun P. Wang at "Symbol Technologies in 1991. (Wang 1993) It is ISO standard 15438.




In addition to features typical of two dimensional bar codes, PDF417's capabilities include:

The introduction of the ISO/IEC document states:[1]

Manufacturers of bar code equipment and users of bar code technology require publicly available standard symbology specifications to which they can refer when developing equipment and application standards. It is the intent and understanding of ISO/IEC that the symbology presented in this International Standard is entirely in the public domain and free of all user restrictions, licences and fees.


""PDF417 Example.svg

The PDF417 bar code (also called a symbol) consists of 3 to 90 rows, each of which is like a small linear bar code. Each row has:

All rows are the same width; each row has the same number of codewords.


PDF417 uses a base 929 encoding. Each codeword represents a number from 0 to 928.

The codewords are represented by patterns of dark (bar) and light (space) regions. Each of these patterns contains four bars and four spaces (where the 4 in the name comes from). The total width is 17 times the width of the narrowest allowed vertical bar (the X dimension); this is where the 17 in the name comes from. Each pattern starts with a bar and ends with a space.

The row height must be at least 3 times the minimum width: Y ≥ 3 X.[2]

There are three distinct bar–space patterns used to represent each codeword. These patterns are organized into three groups known as clusters. The clusters are labeled 0, 3, and 6. No bar–space pattern is used in more than one cluster. The rows of the symbol cycle through the three clusters, so row 1 uses patterns from cluster 0, row 2 uses cluster 3, row 3 uses cluster 6, and row 4 again uses cluster 0.

Which cluster can be determined by an equation:[3]

Where K is the cluster number and the bi refer to the width of the i-th black bar in the symbol character (in X units).


Where Ei is the i-th edge-to-next-same-edge distance. Odd indices are the leading edge of a bar to the leading edge of the next bar; even indices are for the trailing edges.

One purpose of the three clusters is to determine which row (mod 3) the codeword is in. The clusters allow portions of the symbol to be read using a single scan line that may be skewed from the horizontal.[5] For instance, the scan might start on row 6 at the start of the row but end on row 10. At the beginning of the scan, the scanner sees the constant start pattern, and then it sees symbols in cluster 6. When the skewed scan straddles rows 6 and 7, then the scanner sees noise. When the scan is on row 7, the scanner sees symbols in cluster 0. Consequently, the scanner knows the direction of the skew. By the time the scanner reaches the right, it is on row 10, so it sees cluster 0 patterns. The scanner will also see a constant stop pattern.


Of the 929 available code words, 900 are used for data, and 29 for special functions, such as shifting between major modes. The three major modes encode different types of data in different ways, and can be mixed as necessary within a single bar code:

Error correction[edit]

When the PDF417 symbol is created, from 2 to 512 error detection and correction codewords are added. PDF417 uses "Reed–Solomon error correction. When the symbol is scanned, the maximum number of corrections that can be made is equal to the number of codewords added, but the standard recommends that two codewords be held back to ensure reliability of the corrected information.

Comparison with other symbologies[edit]

PDF417 is a stacked barcode that can be read with a simple linear scan being swept over the symbol.[6] Those linear scans need the left and right columns with the start and stop code words. Additionally, the scan needs to know what row it is scanning, so each row of the symbol must also encode its row number. Furthermore, the reader's line scan won't scan just a row; it will typically start scanning one row, but then cross over to a neighbor and possibly continuing on to cross successive rows. In order to minimize the effect of these crossings, the PDF417 modules are tall and narrow — the height is typically three times the width. Also, each code word must indicate which row it belongs to so crossovers, when they occur, can be detected. The code words are also designed to be delta-decodable, so some code words are redundant. Each PDF data code word represents about 10 bits of information (log2(900) ≈ 9.8), but the printed code word (character) is 17 modules wide. Including a height of 3 modules, a PDF417 code word takes 51 square modules to represent 10 bits. That area does not count other overhead such as the start, stop, row, format, and ECC information.

Other 2D codes, such as "DataMatrix and "QR, are decoded with image sensors instead of uncoordinated linear scans. Those codes still need recognition and alignment patterns, but they do not need to be as prominent. An 8 bit code word will take 8 square modules (ignoring recognition, alignment, format, and ECC information).

In practice, a PDF417 symbol takes about four times the area of a DataMatrix or QR Code.[7]


  1. ^ a b
  2. ^ ISO/IEC 2006, p. 28, 5.8.2.
  3. ^ ISO/IEC 2006, p. 9, 5.3.1.
  4. ^ ISO/IEC 2006, pp. 76–78
  5. ^ ISO/IEC 2006, 5.11.1.
  6. ^ For example, the Symbol Technologies LS-4000 series.
  7. ^ Using Barcodes in Documents – Best Practices (PDF), Tampa, FL: Accusoft, 2007, archived from the original (PDF) on May 24, 2012, retrieved May 9, 2012 

External links[edit]

) )