|This article needs additional citations for "verification. (April 2014) ("Learn how and when to remove this template message)|
Telnet is a protocol used on the "Internet or "local area networks to provide a bidirectional interactive text-oriented communication facility using a virtual "terminal connection. User data is interspersed "in-band with Telnet control information in an 8-bit "byte oriented data connection over the "Transmission Control Protocol (TCP).
Telnet was developed in 1969 beginning with RFC 15, extended in RFC 854, and standardized as "Internet Engineering Task Force (IETF) Internet Standard "STD 8, one of the first Internet standards. The name stands for "teletype network".
Historically, Telnet provided access to a "command-line interface (usually, of an "operating system) on a remote host, including most network equipment and "operating systems with a configuration utility (including systems based on "Windows NT).["clarification needed] However, because of serious security concerns when using Telnet over an open network such as the Internet, its use for this purpose has waned significantly in favor of "SSH.
The term telnet is also used to refer to the software that implements the client part of the protocol. Telnet client applications are available for virtually all "computer platforms. Telnet is also used as a "verb. To telnet means to establish a connection using the Telnet protocol, either with command line client or with a programmatic interface. For example, a common directive might be: "To change your password, telnet into the server, log in and run the "passwd command." Most often, a user will be telnetting to a "Unix-like server system or a network device (such as a router) and obtaining a login prompt to a command line text interface or a character-based full-screen manager.
|"Internet protocol suite|
Telnet is a "client-server protocol, based on a "reliable "connection-oriented transport. Typically, this protocol is used to establish a connection to "Transmission Control Protocol (TCP) "port number 23, where a Telnet server application (telnetd) is listening. Telnet, however, predates TCP/IP and was originally run over "Network Control Program (NCP) protocols.
Even though Telnet was an ad hoc protocol with no official definition until March 5, 1973, the name actually referred to Teletype Over Network Protocol as the RFC 206 (NIC 7176) on Telnet makes the connection clear:
The TELNET protocol is based upon the notion of a virtual teletype, employing a 7-bit ASCII character set. The primary function of a User TELNET, then, is to provide the means by which its users can 'hit' all the keys on that virtual teletype.
Essentially, it used an 8-bit channel to exchange 7-bit ASCII data. Any byte with the high bit set was a special Telnet character. On March 5, 1973, a Telnet protocol standard was defined at "UCLA with the publication of two NIC documents: Telnet Protocol Specification, NIC 15372, and Telnet Option Specifications, NIC 15373.
Many extensions were made for Telnet because of its negotiable options protocol architecture. Some of these extensions have been adopted as "Internet standards, IETF documents STD 27 through STD 32. Some extensions have been widely implemented and others are proposed standards on the IETF standards track (see below) Telnet is best understood in the context of a user with a simple terminal using the local Telnet program (known as the client program) to run a logon session on a remote computer where the user's communications needs are handled by a Telnet server program.
|This section does not "cite any "sources. (April 2010) ("Learn how and when to remove this template message)|
When Telnet was initially developed in 1969, most users of networked computers were in the computer departments of academic institutions, or at large private and government research facilities. In this environment, security was not nearly as much a concern as it became after the bandwidth explosion of the 1990s. The rise in the number of people with access to the Internet, and by extension the number of people attempting to "hack other people's "servers, made encrypted alternatives necessary.
These security-related shortcomings have seen the usage of the Telnet protocol drop rapidly, especially on the public "Internet, in favor of the "Secure Shell (SSH) protocol, first released in 1995. SSH has practically replaced Telnet, and the older protocol is used these days only in rare cases to access decades old legacy equipment that does not support more modern protocols. SSH provides much of the functionality of telnet, with the addition of strong encryption to prevent sensitive data such as passwords from being intercepted, and "public key authentication, to ensure that the remote computer is actually who it claims to be. As has happened with other early Internet protocols, extensions to the Telnet protocol provide "Transport Layer Security (TLS) security and "Simple Authentication and Security Layer (SASL) authentication that address the above concerns. However, most Telnet implementations do not support these extensions; and there has been relatively little interest in implementing these as SSH is adequate for most purposes.
It is of note that there are a large number of industrial and scientific devices which have only Telnet available as a communication option. Some are built with only a standard RS-232 port and use a serial server hardware appliance to provide the translation between the TCP/Telnet data and the RS-232 serial data. In such cases, SSH is not an option unless the interface appliance can be configured for SSH.
IBM 5250 or 3270 workstation emulation is supported via custom telnet clients, TN5250/"TN3270, and "IBM servers. Clients and servers designed to pass "IBM 5250 data streams over Telnet generally do support "SSL encryption, as SSH does not include 5250 emulation. Under "OS/400 (also known as "IBM i), port 992 is the default port for secured telnet.
All data "octets except 0xff are transmitted over Telnet as is. (0xff, or 255 in decimal, is the IAC byte (Interpret As Command) which signals that the next byte is a telnet command. The command to insert 0xff into the stream is 0xff, so 0xff need to be escaped by doubling it when sending data over the telnet protocol.) Therefore, a Telnet client application may also be used to establish an interactive raw TCP session, and it is commonly believed that such session which does not use the IAC is functionally identical.["citation needed] This is not the case, however, because there are other network virtual terminal (NVT) rules, such as the requirement for a bare carriage return character (CR, "ASCII 13) to be followed by a NUL (ASCII 0) character, that distinguish the telnet protocol from raw TCP sessions.["clarification needed] On the other hand, many systems now possess true raw TCP clients, such as "netcat or "socat on UNIX and "PuTTY on Windows, which also can be used to manually "talk" to other services without specialized client software. Nevertheless, Telnet is still sometimes used in "debugging network services such as "SMTP, "IRC, "HTTP, "FTP or "POP3 servers, to issue commands to a server and examine the responses, but of all these protocols only FTP really uses Telnet data format.
Another difference of Telnet from a raw TCP session is that Telnet is not "8-bit clean by default. 8-bit mode may be negotiated, but high-bit-set octets may be garbled until this mode was requested, and it will not be requested in non-Telnet connection. The 8-bit mode (so named binary option) is intended to transmit binary data, not characters though. The standard suggests the interpretation of codes 0000–0176 as ASCII, but does not offer any meaning for high-bit-set data octets. There was an attempt to introduce a switchable character encoding support like HTTP has, but nothing is known about its actual software support.