This article needs additional citations for "verification. (September 2017) ("Learn how and when to remove this template message)
Total internal reflection is the phenomenon which occurs when a propagated "wave strikes a medium boundary at an angle larger than a particular critical angle with respect to the "normal to the surface. If the "refractive index is lower on the other side of the boundary and the incident angle is greater than the critical angle, the wave cannot pass through and is entirely "reflected. The critical angle is the "angle of incidence above which the total internal reflection occurs. This is particularly common as an "optical phenomenon, where light waves are involved, but it occurs with many types of waves, such as "electromagnetic waves in general or "sound waves. When a wave reaches a boundary between different materials with different refractive indices, the wave will in general be partially "refracted at the boundary surface, and partially reflected. However, if the angle of incidence is greater (i.e. the direction of propagation is closer to being parallel to the boundary) than the critical angle – the angle of incidence at which light is refracted such that it travels along the boundary – then the wave will not cross the boundary, but will instead be totally reflected back internally. This can only occur when the wave in a medium with a higher refractive index (n1) reaches a boundary with a medium of lower refractive index (n2). For example, it will occur with light reaching "air from glass, but not when reaching glass from air.
Total internal reflection of light can be demonstrated using a semi-circular block of glass or plastic. A "ray box" shines a narrow beam of light (a ""ray") onto the glass medium. The semi-circular shape ensures that a ray pointing towards the centre of the flat face will hit the curved surface at a right angle; this will prevent refraction at the air/glass boundary of the curved surface. At the glass/air boundary of the flat surface, what happens will depend on the angle. If θc is the critical angle, then the following scenarios depict what will happen according to the size of the incident angle.
The critical angle is the angle of incidence for which the angle of refraction is 90°. The angle of incidence is measured with respect to the "normal at the refractive boundary (see diagram illustrating "Snell's law). Consider a light ray passing from glass into air. The light emanating from the interface is bent towards the glass. When the incident angle is increased sufficiently, the transmitted angle (in air) reaches 90 degrees. It is at this point no light is transmitted into air. The critical angle is given by Snell's law,
Rearranging Snell's Law, we get incidence
To find the critical angle, we find the value for when 90° and thus . The resulting value of is equal to the critical angle .
Now, we can solve for , and we get the equation for the critical angle:
If the incident ray is precisely at the critical angle, the refracted ray is "tangent to the boundary at the point of incidence. If for example, visible light were traveling through "acrylic glass (with an index of refraction of "approximately 1.50) into air (with an index of refraction of 1.00), the calculation would give the critical angle for light from acrylic into air, which is
Light incident on the border with an angle less than 41.8° would be partially transmitted, while light incident on the border at larger angles with respect to normal would be totally internally reflected.
If the fraction is greater than 1, then arcsine is not defined—meaning that total internal reflection does not occur even at very shallow or grazing incident angles.
So the critical angle is only defined when is less than or equal to 1.
An important side effect of total internal reflection is the appearance of an "evanescent wave beyond the boundary surface. Essentially, even though the entire incident wave is reflected back into the originating medium, there is some penetration into the second medium at the boundary. The evanescent wave appears to travel along the boundary between the two materials, leading to the "Goos-Hänchen shift.
If a plane wave, confined to the xz plane, is incident on a "dielectric with an angle and wavevector then a transmitted ray will be created with a corresponding angle of transmittance as shown in the figure above. The transmitted wavevector is given by:
If , then since in the relation obtained from "Snell's law, is greater than one for
As a result of this becomes complex:
The electric field of the transmitted plane wave is given by and so evaluating this further one obtains:
Using the fact that and Snell's law, one finally obtains
where and .
This wave in the optically less dense medium is known as the evanescent wave. It is characterized by its propagation in the x direction and its exponential "attenuation in the z direction. Although there is a field in the second medium, it can be shown that no energy flows across the boundary. The component of Poynting vector in the direction normal to the boundary is finite, but its time average vanishes. Whereas the other two components of Poynting vector (here x-component only) and their time averaged values are in general found to be finite (i.e. nonzero).
It is important to note that the Goos-Hänchen effect only occurs for linearly polarized light. If the light is "circularly or "elliptically polarized, it will undergo the analogous "Imbert–Fedorov effect.
Under ordinary conditions, the "evanescent wave transmits zero net energy across the interface. However, if a third medium with a higher "refractive index than the low-index second medium is placed within less than several wavelengths distance from the interface between the first medium and the second medium, the evanescent wave will be different from the usual one, and it will pass energy across the second into the third medium. (See "evanescent wave coupling.) This process is called "frustrated" total internal reflection (FTIR) and is very similar to "quantum tunneling. The quantum tunneling model is mathematically analogous if one thinks of the electromagnetic field as being the wave function of the photon. The low index medium can be thought of as a potential barrier through which photons can tunnel.
The transmission coefficient for FTIR is highly sensitive to the spacing between the third medium and the second medium (the function is approximately exponential until the gap is almost closed), so this effect has often been used to modulate optical transmission and reflection with a large "dynamic range.
An important aspect of total internal reflection is the appearance of a significant (rather than just 0° or 180°) "phase shift upon reflection. Mathematically this is expressed by the "Fresnel reflection coefficients acquiring an "imaginary part. This resulting phase advance grows as the incidence angle increases beyond the critical angle, but unequally for the s and p "polarization components of the incident wave.
This polarization dependent phase shift was discovered and quantitatively explained by "Augustin-Jean Fresnel who employed it in his invention, the "Fresnel rhomb, in which the angles of incidence are adjusted such that the two internal reflections cause a relative phase shift of 90° between the two polarizations of an incident wave. This performs the same function as a "quarter-wave plate, but is more achromatic (phase shift has less dependence on "wavelength). Either type of quarter-wave retarder may be used, for instance, to transform "linear polarization to "circular polarization (which Fresnel also discovered) and vice versa.
Total internal reflection can be observed while swimming, when one opens one's eyes just under the water's surface. If the water is calm, the surface appears mirror-like (except directly overhead, in "Snell's window).
"Diamonds used for jewelry are normally shaped in such a way as to maximize the amount of light that is totally internally reflected from the back side of the diamond. The very high refractive index of diamond gives a small critical angle allowing almost all the light entering the diamond to be reflected back for optimized "diamond cuts such as the "brilliant.
|Wikimedia Commons has media related to Total internal reflection.|